Recent content by Slogg

How are you able to import the 2002 model year? I thought it was a 25 year rule to import, which would put the latest year at 2000.

That’s good to know, thanks for the info. Do you know of another brand front/rear bumper that is reputable/has good ratings?

Jdub94- I looked on ASFIR’s website for the front bumper for my 1996 KZJ95, but nothing showed up. Is that front bumper listed under a different model/year that happens to fit the KZJ95?

I found this on Ebay. I assume this is the correct connector for the diagnostic port? 22 Pin OBD OBD1 to 16 Pin OBD2 Connector Adapter Cable for Toyota Lexus DLC B145 | eBay -...

Do you have a link to the particular adapter you’re using? I’d like to experiment with it.

Yours is a 1996 and it has an OBDII port? Mine is a 1996 and it only has the diagnostic port in the engine bay.

Just out of curiosity, why are you selling?

I purchased and installed a PPD performance with the 3” down pipe and I haven’t had any issues thus far.

I just ordered a set of Dobinsons for the front & rear of my KZJ95. I too wanted stock ride height, but the only thing I could find was a 1.5”-2.0” lift, but I decided that was ok for me. What sold me on the Dobinsons was that they make a suspension setup specifically for the Prado 95 with the...

I ended up purchasing a bolt on 3" stainless steel exhaust kit from PPD Performance, based out of Australia. They were able to ship the parts to me in the US...

This noise is a little louder, but not too obnoxious for me. As for the MPG, I haven't really compared it. I just got my Prado 95 back on the road after 2 months of waiting for parts to arrive from Japan/Dubai for a bunch of preventative maintenance items that I wanted to take care of.

Has anyone installed this inclinometer/tilt altimeter gauge on a Prado 95 that didn't come with it from the factory? I'd like to add one, but I'm hesitant about cutting holes in the dash, fearing I may not cut in the exact spots....

Unfortunatley I don't. I ordered mine off Ebay. Here's a link to the one I purchased and it works well for me: https://www.ebay.com/itm/186127316792?hash=item2b560d7738:g:JN0AAOSwPVVlMR4z

I did the EGR delete with this same kit, and as @pavlenti said, its quite tricky to remove the EGR pipe that runs between the engine and firewall connecting the exhaust to intake manifold. I was able to remove the pipe without removing the intake manifold or cylinder head, but it took me a god...

I just left the studs at 10 Ft Lbs and torqued the 2 bolts & 6 nuts to 38 Ft Lbs. So far everything has been working well without any issues.