Hi,
This is just what I am looking for, I would also be interested in RH side one for a B46 - 3B engine..... or at least the plans so I could get one laser cut and built in the UK... Thanks...
Simon
Hi,
I am considering mounting some domestic batteries under the tub on the chassis. The idea is that it keeps the weight low and saves space for other stuff...
has anybody done this, mine is a 40 series bj46. Pictures would be great...
thanks....
It might be the galvanising on the gearbox mount not letting it sit on the L brackets correctly.... I have a spare set that has not been galvanised which I will try out....
Ok... got the box in but very little clearance between the rear drive shaft and the crossmember... is this just the all new mounts I have used and it will settle down when run in or something I should worry about???
Ok... got the box in but very little clearance between the rear drive shaft and the crossmember... is this just the all new mounts I have used and it will settle down when run in or something I should worry about???
Yes it seems that is the case.... for now Mike at the workshop who does custom stuff and is a star took the B end and mated it to the H plate to make a Frankenstein input shaft retainer... half H and Half B... seems to fit ok.... I will hunt down the correct one to fit at a later date but can...
I found this out when trying to fit the thrust bearing and fork from the early H55F box to the later one from an HJ60.... do I need the BJ60 input shaft cover?
All all back together however the input shaft cover is wrong.... it’s not long enough... could someone confirm that I need to find a late H55F cover for a BJ engine?
Ok.... got another 5spd from a late 60 series and rebuilt with new input shaft (for3B) used the 40 series top so should plug straight in...
Lots of good links on mud relating to better input bearing oiling on late H55 box and difference between the 40 & 60 series top plates.... not an option...