Recent content by sandnik

The correct answer to the original question (way up there!) is "sort of". There are some caveats: The cluster must be from the similar "wiring year". The models of J100 were split around 08/2002, I'm not sure which year the LX470 change. The later models use CAN, while the earlier model...

Hi All, I've picked up an OEM roof rack however the bolts they gave me are not the correct ones for the feet they provided. I'm after a set of 8 Torx bolts for an OEM roof rack. Pictures below show what I am after. Alternatively, if someone knows the part number for these bolts please share...

I desoldered and removed the smaller of the two piezo speakers and the over speed alert was disabled. The larger one is for the door chime etc.

Linking to this thread . . The only known fix to the pre 08/2002 HDJ100 overspeed alarm seems to be a hardware mod to the instrument cluster.

Thanks for the thought Matanda, but unfortunately this diagram is for post 08/2002. (You can tell as connector 2Q is referenced, which was used post update). I've figured out the wiring to enable the sub-tank on the pre-08/2002 models. See the schematic.

Sadly no. The sub-tank change over is listed for the pre 08/2002 1FZ-FE and 2UR-FE. For all the diesel engines there's no indication of how it's wired. (There is a diagram for the 08/2002 and on, but I'm after the pre-update diagram).

This is an old thread, but has anyone found the EWD for a HZJ105 for 1999-08/2002? All the EWD I've found (and there's been a few) don't have the sub-tank wiring for the 1HZ (only the 1FZ-FE and 2UR-FE). I've found the wiring for the 08/2002 an on, but the instrumentation cluster electronics...

The -12440 is an 090II - it's definitely not this. The terminal I'm trying to find has a width of 2.4mm (the 090II is 3.0mm), with the only part in RM06H0E matching that width being the 060 / 1.5 82998-24350 However the picture of -24350 doesn't match what I have.

Hi. Does anyone know the part number for the junction terminals? I've checked RM06H0E and can't find a matching terminal (the junction connectors are not listed either). Any help appreciated. Thanks.

Old thread, but I am after photos / information on how the 4spd Auto ECU is mounted in a LHD J100. Any hints / photos would be appreciated. I know where it mounts based on diagrams / connector location on the loom - but it doesn’t seem to match with any existing brackets.

Yeah . . I'm currently repairing wiring on a few looms of a 2001 LC. I'm having to resort to visiting wreckers to collect connectors. My knowledge of these has vastly improved over the past 6 months. Thankfully every terminal I need I've been able to purchase new.

Are the contact sides of 12690 and 12640 the same? (I'd expect so seeing as they come from the same connector family 1.0 III / 040 ). Definitely the side that attaches to the connecting wire would be different (IDC terminal vs normal crimp)

Hi @jerryb, I'm not sure of 7116-4300-2 but if it's the 1.0 III terminals you are after according to RM060H0E these are the Toyota part numbers: 82998-12670 1.0III MALE (YAZAKI 040 Type M) - ■[Yazaki] 040 Type M terminal Non waterproof / M040 - https://www.hi-1000ec.com/product/1257...

Yep! That's the part. Between Hi-1000ec; Corsa; Mouser; and Digikey I've found everything I need. Thanks!

I've just realised that I don't need the IDC pins . . :facepalm: . . I'm working with the male connectors which are all non-IDC (it's only the female connectors on "82792 - WIRE, INSTRUMENT PANEL INTEGRATION" that are IDC).