Recent content by Romo

I am going to install my Borla exhaust system and wonder if the "oversized" tip will interfere with the 4X4 Labs rear bumper. Has anybody, "been there, done that"? THX Dave

Beautiful Canada Day long weekend with my oldest and a chance to simplify travels by leaving the truck and trailer at home!

NVM...I finally found a photo on here that showed it's location (at the bottom of the gear mode section). THX

I have my instrument cluster out to replace the D bulb and the O/D bulb, but I don't know where the O/D light is on the cluster. I could poke around and remove bulbs to check, or maybe someone can "enlighten" me. THX Dave

I experienced the same problem, same plug, just a few weeks ago. Let it soak in penetrating oil and be patient. Mine came loose after 4 days soaking and moving it a bit at a time. Good luck!

With patience and good penetrating oil, the problematic spark plug came out after soaking for 4 days. No damage and the new one threaded in nicely!

I have now used a penetrating oil and having it soaking (I only had WD at the time). Thanks for your reply, it gives me hope that it's not cross threaded, just a PITA spark plug.

Seized #7 spark plug (DS, closest to firewall). Replaced the plugs and one is seized. Really tough to move in either direction. Soaked over night in WD40, tried again this morning to re-tighten and only moved about a 1/8 of a turn. I am considering trying the 44K fuel cleaner method mentioned...

Kinda what I was thinking. Thanks, I'm gonna give that I try. Yup, that worked just as you expected. THX Squid!

Oops! How do I delete a duplicate posting?

I have a '99 and removed the front seats for lubing and cleaning. I had the PS seat bolted down and moved the tracks forward to get access to the worm gear, but did not have the DS bolted down and the tracks became misaligned. Only the LH worm gear has moved. I re-installed to hopefully realign...

I have a '99 and removed the front seats for lubing and cleaning. I had the PS seat bolted down and moved the tracks forward to get access to the worm gear, but did not have the DS bolted down and the tracks became misaligned. Only the LH worm gear has moved. I re-installed to hopefully realign...

It's back! After 5 months at the shop and 7 months total, I now have the task of putting it all back together! I stuck with the champagne pearl and removed all doors for a complete paint job (minus the roof. I'm considering a Rhino lined roof). A can of worms for sure, but happy with a rust...

There is a used radiator available on FB Marketplace in Vancouver from a RHD 100 Series. This may work in the meantime if you in fact do need a rad.