Update after new o2 sensor and 300 miles, no new DTC's. I think for the future when people get these lights you've got to check/resolve all your dtc codes first -the failsafe mode(and accompanied trac lights), C1201 dtc as described in the fsm can be triggered by dozens of other codes. Strange...
Mine's a 2003, North America model. I ran across a general Toyota video suggesting there is a general behavior from Toyota ECM to display the VSC and VSC TRAC lights. I happen to also have a p0051 code(upstream O2 sensor, bank 2). I will post back in a few days once I get time to install the new...
My traction control and abs actually did activate on curved freeway offramp prior to these lights turning on recently. Besides inspecting the cables for anything obvious is there any way to check which is faulty -did you just replace them all?
Did you trace the wires in the harness between the chassis and inside the door? As posted above, mine severed inside the scrunchie between the door and chassis. The driver door switch panel will still make sounds even when one of the wires is clipped.
Hey man I just had the same problem and found another thread on here to help me fix it. In my instance it was a wire that had completed severed inside the boot that's between the body and driver's door -they're all wrapped up together really good so you'll need to check very carefully that...
Hey guys,
Cleaning out the garage and thought I'd post here before tossing it. It is un-damaged and all the parts are either still bolted on or in a ziploc baggy. The rest of the bumper is not available. The roller bearings work smooth. Anyone interested? Thanks!
Adrian
Hey all,
I am not showing the VGRS light on in the dash but I am not able to successfully keep the steering wheel centered after re-aligning via TechStream. There are some codes showing up and they re-appeared after clearing. Other threads I've read on here go through replacing the VGRS...
Thank you for the advice,
I managed to get my hands on a $50 tin of AHC fluid and a flavor injector. Pictures attached. Unfortunately my fluid is looking milky under the line of "old fluid stuck in the system mixed with new". I distinctly remember the fluid having a tint of dark blue/green...
Thanks for the replies,
I was not able to smell the suspension fluid but will post back with the(hopefully favorable) test result as pictured above. Nice little test.
Just to confirm: AHC fluid should be clear or rose is the color when new, no other colors like blue or green? As it ages it...
Hi guys,
I have read a lot of threads on here regarding preventative maintenance however I haven't been able to develop a definitive understanding of what is the normal coloration for the AHC fluid as seen in the reservoir.
About 8 months prior to today: I had Lexus of Portland "Flush" the...
I have a 2003 LX470 that needs only the rear bumper cover. I am willing to entertain offers for 4x4 metal bumpers as well. The color on my car is Eucalyptus Mica and galactic grey cladding. Please let me know what you got as far and condition, price. My alternatives are eBay (around $200) or new...