Recent content by rad4runner

(PFA)... I would like to retrofit my LN106 with rear seatbelts, but there are no mounting holes. Has anybody done it? How did you mount the ends? TIA.

Thanks a lot for the schematic, gnob! The glow plugs and timer indicator are on separate circuits. That makes me wonder... Schematic shows a standard relay for the glow plug, not dependent on the pre-heating timer. Circuit shows that as long as Ignition is on glow plug relay stays on...

How long does your LN106 3L glow plug *relay* stay on? This may be different from the time the *indicator* stays on. Glow plug *indicator* has stopped working, altho I remember that it stayed on for about 5 seconds when it was working. I verified that my LN106 *relay* stays energized for approx...

Possible Brake Vacuum Problem... I started a troubleshooting thread here: Brake Fault Lights, Idle Drops and Brake Pedal Pulsates When Stepping Hard on Brake - https://forum.ih8mud.com/threads/brake-fault-lights-idle-drops-and-brake-pedal-pulsates-when-stepping-hard-on-brake.1373727/

Hi folks, I searched for similar post but could not find one so I'm starting this thread. Symptoms appear when I step *hard* on the brake: 1) Actual stopping is harder (takes longer to slow down), 2) Brake fault lights up, 3) When finally at full stop the pedal pulsates; as in alternately...

Note to self: How to center power steering gearbox:

Hi folks, I am currently in the process of installing my 2-inch Old Man Emu lift kit. This extension on the torque rod attachment does not look stock. However, if I removed it, the forward (left side on picture) of the rod would hit the skid plate. Should I unbolt the rod, set truck on ground...

Thank you very much, @AirheadNut! Link makes sense. My LN106 is a 1996. Paint Code is 751. Color looks similar to other trucks. My LN106 With Paint Code 751 Another LN106 A Third-Gen 4Runner with Same Paint Code

Thanks a lot, @GreenPump ! Table below gives me a better idea of my current lift. I hope it would not be much trouble to ask you for a couple more things to confirm: Wheelwell arch to Rim measurements. Do you have 15-inch rims as well? Bottom of frame to top of axle housing. Please also share...

Hi folks I started a thread on my build however I would like to ask fellow members for help to determine current lift and so I can find correct shocks for it. (I recently bought it, I do not know current lit and previous owner jerry-rigged rear shock mounts). Link to my inquiry is here...

I hope you could help me with a couple of challenges: I do not know what lift it has, and Apparently the previous owner jerry-rigged the rear shock mounts in order to fit what seems to be the original shocks (now too short). I hope you could help me determine how much lift it has and find the...

Hi folks, I recently bought an LN106 Hilux, non-turbo 3L, 2.8Liter diesel 4WD, 5-speed manual transmission. Engine, transmission, including 4x4, seem to be working very well, but I'm in the process of reconditioning it. Will keep you posted on my progress.

Hi folks, Hi folks, I recently bought an LN106 Hilux, non-turbo 3L, 2.8Liter diesel 4WD, 5-speed manual transmission. Engine, transmission, including 4x4, seem to be working very well, but I'm in the process of reconditioning it. Will keep you posted on my progress.

Hi. Did you ever have a problem with too much heat from the exhaust pipe which would get closer to the bigger than stock tire?