I think I forgot to come back to these threads when I witnessed my cruiser take fuel without flipping the handle or trickling it in. No condom on the nozzle, smooth fill up for the thirsty gal.
So if you can get your rig to a station with the old school nozzles, you'll be good. Otherwise pull...
Started mine up for the first time in a year. slight tick or rattle on slight acceleration. I’ll post the video to YT and link it.
You can hear it between 15 and 21 seconds.
Finally got around to taking off my deflector mounts and sure enough, rusted just like Kernal's. I'm half tempted to remove the nutserts, sand it all down, weld the holes and paint over it. My rear wiper works just fine in all weather conditions.
Since my rear glass was blown out in 2018 I...
Checked partsouq and they have the line NLA as well. I've decided to just make my own with NiCop line. I bought one of the rear lines from Toyota last year but that long one you mentioned, from LSPV to the front is the one I haven't been able to track down. 4732460210 according to partsouq.
Finally getting around to posting pictures. Hardest part was finding small screws. I ended up using small hinge screws from a hinge kit I had lying around for a display box I was building. I haven't driven the cruiser in a while as I've been putting off fixing the busted brake line and leaking...
Mine has spent its life in NJ, PA and I believe the NYC area. It's showing on the frame now. I've considered finding a nice frame unlocked and swapping my axles over but who knows.
You use the NiCop lines? I was going to replace one section along the frame but I might as well do the whole set, especially after replacing one piece from Mr. T that went from the D/S caliper to the splitter on the axle.