Recent content by MiSFiTiSM

  1. MiSFiTiSM

    Is it possible to swap a siamese head (early to 67) to a non-siamese head (68 and later)?

    How did this end up working out for you? I am looking for new headers but can’t find any 3-1 Siamese port headers, so if I can upgrade the head to ‘68-‘71 I should be able to get new headers as well. Thanks
  2. MiSFiTiSM

    5.29's are just fine

    3 speed tranny. 3 on the tree. I’m not concerned with top speed. I’ll probably never be on a road going over 50 and even when I was driving it 30 years ago I never took it on the freeway. Cruising around town 30-40mph. And any of the roads getting to where I need to go it would be short...
  3. MiSFiTiSM

    4.88 or 5.29

    I was just thinking about that but I always loved my 3 on the tree haha
  4. MiSFiTiSM

    5.29's are just fine

    Thanks for the reply. Can you tell me what I could expect in the difference between 4.88 and 5.29? Is it just sluggish starts and top speed?
  5. MiSFiTiSM

    4.88 or 5.29

    I looked around the forum and have been reading up on this a bunch but I haven’t seen anything exactly what I am running so I am making a post looking for ideas and suggestion from you fine folks. I got a 1967 FJ40 with the stock 1F engine. Has both front and rear axle from 1985 FJ60. SOA...
  6. MiSFiTiSM

    5.29's are just fine

    What engine you running? I’m currently trying to decide what gears to get. My set up is a 1967 FJ40 with the original 1F engine. I have 1985 FJ60 axles running 35x10.5 tires. I can’t decide between 4.88 or 5.29. I don’t care about top speed, I just don’t want it to be sluggish when starting...
  7. MiSFiTiSM

    High Steer Help

    I am currently doing a SOA conversion on my 1967 FJ40. I am swapping the axles with a 1985 FJ60 and using the power steering off the FJ60 chassis as well. On the FJ40 I’m going to use the stock front springs with a shackle reversal for the front, Then I’m taking the rear springs off the FJ60...
  8. MiSFiTiSM

    Ruff Stuff SOA Kit

    You ever figure out the caster plate? I am wondering the same thing
  9. MiSFiTiSM

    Review Terrain Tamer Parabolic Leaf Spring Review

    Damn more food for thought. I was working on piecing together my own lift kit for 1967 FJ40 but after reading everything here I’m really tempted to pick up this kit!! Only question I have, should I get the kit without the shocks and run IMS or stick with the yellows in the kit? Sounds like...
  10. MiSFiTiSM

    Custom lift kit questions

    Oh awesome. If I could buy a set from you that would be great!?
  11. MiSFiTiSM

    Custom lift kit questions

    Great thanks again for the info. I’ll look for a set of shackles for a 2” lift and not worry about anti inversion.
  12. MiSFiTiSM

    Custom lift kit questions

    Thank you. That’s what I figured. I’m just not sure if the anti inversion shackles I linked in the original post are the correct size. Or could you recommend some anti inversion shackles for a 2” lift leaf springs?
  13. MiSFiTiSM

    Custom lift kit questions

    Ok got the pins added and will contact 4plus products directly when ready to order. Thanks for the help
  14. MiSFiTiSM

    Custom lift kit questions

    In that case can I use my OEM shackles? Or do I need bigger ones?
  15. MiSFiTiSM

    Custom lift kit questions

    Also, I only posted the link for the rear u bolt flip kit but I do have the front kit in my cart. I was wanting to get a steering stabilizer as well but haven’t started researching that yet if anyone would like to comment on that. Thanks.
Back
Top Bottom