Recent content by Mag

That is awesome information! Thanks.

I took out the tail lights and there was not any foam under them. The PO must have removed it. Thanks for the tip!

Yes, you have mentioned corrosion on your GX before. A great deal of water has to be channeled off the roof and down and around the back door. This unique seal caught me offguard. The lack of an adhesive makes it much easier however.

I wanted to share this with everyone now that I discovered this issue. I was working on having the common rust hole that occurs around the third row seat mount above the rear passenger side wheel well repaired. When I was reinstalling all the interior plastic panels over that wheel well I saw...

I just had the rust hole around the passenger side 3rd row seat mount repaired. I was going to reassemble all the plastic trim when I noticed the floor was wet on the steel deck. Looking at the door seal makes me believe that is the source of the water. The seal has metal in it to make it...

My passenger side 2nd row seat adjuster would not function. I looked for discussions on these issues with no luck. I ended up taking it apart and repairing it without much dificulty so I thought I would share this. The plastic push button and slide would not work. You have to remove the side...

I was incorrect. Once I could see the entire bracket I realized it was the correct part from Rockauto. Sorry for the confusion.

It may be an illusion. When I get the old one off I can compare them better than when it is on the engine.

I am replacing the timing belt and water pump on my 2007 GX470. I bought a new Aisin fan bracket from RockAuto to install since that part is buried under many of the items I need to remove for the timing belt job. As I exposed the fan brack it was obvious the Aisin fan bracket from RockAuto...

Batteries Plus will test your battery for free. I have them check the three batteries on my fishing boat each year. I also buy my batteries from them since they have in their computer system when you bought the battery, even if it was hundreds of miles away at another branch.

I use Fluid Film on all my vehicles. It has saved my truck. I use a compressor and the Fluid Film gun.

Here is a picture that was posted on a thread title "Intro to GXOR!" It is the inside of the rear passenger side wheel well and what happens in there.

His shop is outside Stevens Point by a few miles to the east. You would come staright up Hwy 39. Is the sheet metal pans behind that mount OK? Did you check the passenger side wheel well to see if that area is rusting through? Mine looked OK until I started picking at it. Since he is fixing...

Where do you live? I am central Wisconsin and my body shop guy could fix it for a reasonable price. He did all the mentioned sheet metal repair for $900.