I’m lucky that this is 1 of 2 BJ74’s that I own and the second one is pretty much rust free. One day I’ll do the body swap to combine the best of the 2 trucks. Factory cable lockers, 5 speed, PTO winch, suspension seats and 130,000km on the clock. One day…
Finally had some time at home, after crossing BC a couple of times. Sorted out some of the finishing details of the rear drawer system and I’m happy with the results. Bedliner sprayed on the plywood and Richlite for the drawer faces and pull out cutting board/counterspace
Built a pass through for the diesel heater and put it through the paces for the last week. Another fun work trip in the Rockies between Banff, Canmore and Abraham lake.
Found this speedo face at the wreckers, out of a 88 Corolla. Has MPH and KPH and pretty much nailed my speedo correction within a couple km/h. the Toyota gods have smiled upon me.
Decided to tackle Rogers pass on the return trip and see how the cooling system did, normal operating temp has been 75-80° C. Got up to 85°C briefly with egts hitting 725 a couple times for short pushes.
More pictures of the drive, couple of very nice campsites around Trout Lake, and updated the camping setup a bit, organizer on the door should be nice. Somewhere to put all my Jeeps are s*** stickers from Cruiser Outfitters 🤣
Took the long way. Ferry to Nelson then Highway 31 through Trout Lake is one of my favourite drives. Not much of a “highway” as 80ish km of it is single lane unpaved. The passenger approves.
Prepped and repainted the ARB with some raptor liner, I really like the satin black with texture. Now I have to track down a new ARB badge and some 24v turn signals or some fog lights that fit the cutout.
Put the factory tow hooks on but they don’t fit facing upwards and look a bit silly facing...
Proceed to chase the red/black wire from the fog switch plug, it dies at the connection from the sub harness to the main harness. Weird. (Circled red where the red/black wire terminated and in green where the pin is missing in the opposite connector)
Going the other direction from the fog...
Did a deep dive into the oem fog light switch and wiring harness. It helped having an entire wiring harness to lay out on the floor and figure out continuity, I don’t think I would have figured it out without it.
Step one check the book, having a paper copy is so much easier.
Step two...