Recent content by Lion2008

Symptoms: Handbrake Lever button difficult to press at home position Handbrake lever does not make clicking noise when lifting handbrake lever Handbrake does not lock when lifting Handbrake stops car if you keep the handbrake lever up (engaged) To Do: See Pictures provided for more details...

My understanding of how breathers work is that a breather allows the hot air to escape and cool air to enter so they are bidirectional. I moved mine due to corrosion in Illinois. I only extended the hose and used the OEM breather for the rear axle. I did not do anything with the others. If you...

I did not cut a hole. When I pushed the breather hose by the filler tube, it just went through. The gasket is not sealed to the gas filler tube.

I did not have the part numbers for the 2008 springs and I do not know the spring numbers for the 2021 Heritage. Everything else ACA, front struts, shocks front and rear were the same numbers when compared to the 2021 heritage numbers.

I used a 2021 LC Heritage suspension that was also swapped with only 500 miles on it. All the part numbers were the same as the ones found in my 2008 LC. One thing to notice is the color of the 2 painted lines (blue and purple) on the rear springs. I installed the front struts OEM spacers and...

Here it is another thread that goes over the same concerns. Hidden winch mount collision safety - https://forum.ih8mud.com/threads/hidden-winch-mount-collision-safety.1238742/ There seems to be an Australian option out-there, but I am not familiar with it. My main concern with the TT option is...

I live in Chicago and I use CRC Marine 06026 Heavy Duty Corrosion Inhibitor on the outside frame and locations exposed where water and salt can get in easily, and spray liquid film inside the box frame, inside doors & hood using an extension wand (amazon). Good Youtube video for reference.

Thanks Gaijin

KO2 LT285 /70 R17 116S C1 BSW looking for LC200 cold tire pressure. Anyone running load C?

I am able to reach easily the clutch through the opening I described in step 12. See yellow highlighted in picture. You can also reach the area where you can connect the wire for the remote control, but it is a little difficult to connect the wire, so for this, it is much easier to remove the...

It was price, user reviews among winches reliabilities and option for synthetic line. I did not need for my type of driving a premium brand which it was hard to justify the difference in price.

I did not measure the high before I installed the winch. It is 34" now from the ground to the top of the wheel arch with standard tires. The driving feels the same as before. I was not able to notice any difference. I also have installed the ARB under body protection and that is really heavy...

Hi All, I would like to share some pictures of the hidden winch installed this past weekend in my 2008 Toyota Land Cruiser. Steps: Remove front bumper Remove Aluminum crash bar and mounting brackets (4 nuts/each side) Mount Trail Tailor winch bracket Remove cross bar that goes below lights...

Today after reading more about tail light vs Gas fill location for the rear differential breather mod. I decided that the gas fill location as mentioned before is a better location that the tail light location due to the possible smell coming out from the breather and getting inside the car. It...