Sorry for the late reply. Yeah 17362 and 17363Q have flanges at the end of the tube going to the exhaust. I chopped the tube off the end and had the hole in the flange plugged and then ground down flush. Super unnecessary but I just didn’t want those tubes just hanging out down there for no reason.
I removed my entire SAIS when doing the valley leak. Once you try putting the air switching valves back in you’ll be in literal hell. Less garbage under the hood too. If you remove the valves like I did you will have to spend extra on hewitts pressure sensor addons. They’re pricey. I also cut...
I am in the process of removing the entirety of my AHC from my 2013 LX with 112k miles. Truck has lived in Arizona most of its life and the last two years have been in Southern California. All components are completely rust free. Everything was working fine before deletion. This is my first time...
Getting an Ironman front bumper instead of a dissent for my LX because it was cheaper. I finally bit the bullet and swapped and now I’m stuck trying to sell this thing.
Thanks for the input everyone. Glad my transmission isn’t abnormally hot. The thermostat will NOT be getting pinned. And I never really thought about the front bumper like that but it totally makes sense. I wonder if I should be doing diff and xfer case fluid at eariler intervals because of the...
Thanks! I never stumbled upon those threads. Just a lot of threads talking about towing. I’ve read about tundra guys pinning the thermostat and reporting running up to 30 degrees cooler but I understand we have a different cooling setup in the 200. I recently had to replace a solenoid and...
Hey everyone. I’ve been using my ultra gauge to keep track of my transmission temps on my 2013 LX with the 6 speed AB60F. I’ve been seeing torque converter temps as high as in the 230s when accelerating up grades during cross country highway trips. Pan temps are normally around 185 - 195...
As long as the under carriage looks good and rust isn’t invading everything then I wouldn’t worry too much about that truck. The transmission issue listed doesn’t sound too serious. My 2013 does that occasionally. The other issues are normal 3urfe failures. SAIS is known to crap out whenever it...
I’m going to check this weekend. It has not returned after manually operating the solenoid. I’m already ordering new Toyota fluid to do a flush at home asap
The truck was around 84k on original fluid. So I had them flush all the old fluid out and refill it with amsoil atf. Also changed the filter as well. At least that’s what I paid them to do. I monitor the trans pan and torque converter temp on my ultra gauge and everything has been normal since...
Yeah I did. I had a transmission shop in my area do a flush and filter change around 10k miles ago though. When I FOUND the pin it was just hanging around there and wasn’t in place. I put it in because I figured it was supposed to be there.
Perfect! So living in SoCal, I should probably just leave the pin in place? I’ll probably graduate from sketchy wire to an ACTUAL cotter pin though. lol
Hello everyone! I’ve been lurking for awhile and this is my first post here. I’ve had no luck finding any answers.
Can anyone tell me what this part does? While inspecting the trans to try fix a code I found a piece of metal wire hanging from this metal spring loaded button. The button is...