Recent content by kdubbya

Does anyone make 4.10 gears for the 2016+? Really don't think I need/want 4.88s and that's the lowest I've seen.

Problem resolved. Had a wire in the Rear Cross Track Sensor/Backup Sensor harness that was loose/exposed. Shop here corrected it and cleared all codes.

Problem persists. Had a mobile mechanic, fellow Land Cruiser enthusiast, come by and put his Scanner on it. He said that Bus 5 was totally inop and out of his scope to fix with his equipment. Took it to a local shop he recommended for a diagnostic. Apparently when they where on the vehicle...

Thats what I have for precollision.

Just left the dealership. Alignment, and with what I expected to be a reset/recal, of the vgrs sensor didnt fix my problem. Has anyone had this problem resolved?

At a dealership now because of this issue PCS warning would come off and on continuously almost while driving, approximately every 5 sec. Became a bit of a distraction. Think it came on after a trip to the beach where we hit a dune, though it certainly seemed like it shouldn't cause an issue...

Thanks @manofthewoods. I guess they are different in size just not shape. Idk might be smart but circular shapes have a lot for fatigue resistance, i.e. cracking. Maybe square fileted corners? I just need to abide by the rule of slow is smooth, smooth is fast and pay more attention. Lol

Thanks for the help gents. Broke out the multimeter this morning and checked all the fuses. All checked good except for the dome light ironically. Moved to the fusible link to check continuity and it was not there. Replaced with the one I kept in the dash and she turned over no problem...

@CJF really appreciate the point. Thank you.

Hey gents, full open kamono, I connected by battery wrong temporarily (~3sec). Horn went off in my face, scared the s*** out me, and I pulled the negative terminal quickly. Had a Northstar nsb-agm24 that was 6yrs old and showing its age and went to the odyssey extreme odx-agm24f. The...

Can anyone point me to a thread on why the 80s abs module is not rebuildable? Did the googleness but didnt see anything. Thanks.

Anyone done this? Curious about doing this to relocate to the engine bay, not have to take off belly panels for oil changes and be able to use a standard thread on type oil filter. If I'm missing the existing thread please whistle me on to that bird.

It also looks like the swing arm is closer to the body of the vehicle as well. I'm planning to reconfigure the latching mechanisms on the swing arms to spring style lift arms and drill the guides into the top of the bumper. Should bring the tire in a bit more and get rid of those hooks and...

So I installed the lra 40 gallon aux immediately before the bumper. I removed those plastic under side pieces behind both wheels in the fender area and now they're just expose. I guess I looked at the bumper in the shipping container and assumed it would cover them. I'm in the process of just...

Do you have pictures of the underside of the feeder areas? Mine are wide open.