Recent content by JerEazy

  1. J

    Real time help - fuel gauge

    Cleaned all the contacts again. And she rose VERY slowly up. Not sure how much fuel I had when I started. So I’m going to think it’s working and find out when I fill the tank. Can’t recall if it’s a fast moving gauge or a slow one.
  2. J

    Real time help - fuel gauge

    Checked all fuses under the dash. All good All other gauges work
  3. J

    Real time help - fuel gauge

    Gauge worked fine - I took the gauge cluster out to replace shifter lights. When I plugged it all back in, I have no fuel gauge. Stuck on empty. Pulled it back out and cleaned contacts and still nothing. Worked before I pulled the cluster - any thoughts of where to check?
  4. J

    Brake Frustration

    Welp - I guess have a solution. Never checked brand of master cylinder installed or really made sure it was correct. Ordered and Aisin and its name was printed all over it. So I knew I had the correct manufacturer. Bench bled, reconfirmed the pushrod depth, 2 man bled the system and I’ll be...
  5. J

    Audio Question

    Quick bump to check once more
  6. J

    Brake Frustration

    Yep…. That’s what I did
  7. J

    Brake Frustration

    Confirmation of booster and MC
  8. J

    Brake Frustration

    Yeah - that’s in spec. Will take some photos tonight. Going to do some fiddling. I know it’s tough to tell but there is where I have to hold the pedal to be still at a stop in drive. For an idea that’s about 2 fingers (the height of the toes of my shoes) from the floor
  9. J

    Brake Frustration

    If you mean the Booster/MC arm, When I did this I ended up pulling over because the rears (and fronts to some degree) were staying engaged. I’ll adjusted it out a bit further. But I’ll show where it’s at first
  10. J

    Brake Frustration

    how would one check and adjust those to ensure spec? The firewall is solid - checked that when putting the new booster on. I'll take picture or video of the piston measurement I am doing in case i'm a complete idiot. But fairly sure i've got it set right if not slightly to the too far...
  11. J

    Brake Frustration

    yeah ABS is gone to remove that as a potential issue. The brake and gas pedal are not near each other at full press. the brake is basically on the floor.
  12. J

    Brake Frustration

    That was absolutely triple checked using the tool. I did not make any changes or checks on the pedal side. And I think that may be where I’m missing a step.
  13. J

    Brake Frustration

    When you say pushrod - do you mean at the booster/MC? Or the pedal side of the booster?
  14. J

    Black Friday Blem sale coupon codes

    Why did I see this too late!! Great products and thanks for the deals.
  15. J

    Brake Frustration

    97 non-triple locked. Since I bought it I have been fighting the incredibly long pedal travel before engagement. The pedal goes until about basically the last 2-3” before starting to slow. Engages great from there. But to hold a stop the pedal is so low you can barely get your other foot...
Back
Top Bottom