Recent content by jeffKerala

Thank you let me have a look

can't use the OEM wiring ? that was mentioned in the link you posted

Two wirings are missing from my harness. What should I do now? or connect a small wire between 12-16 for RHD models?

Here is the pics of the replaced factory switch with new fog light switch

new combination swtich

the part number is correct i got it from the catalogue, socket is also correct

reinstalled the meter twice but still no hope, I'm thinking I missed any wirings that I installed but don't know where to start everything works except this

After reinstalling the dash, the fuel gauge does not work when the ignition on the needle goes up to full and all the back to low after one second with a fuel light warning. what to check and where to check. I had to remove the sidekick panels to replace the fog light relay. reinstalled...

Okay thank you

bulbs are new

The fuel gauge not working after reinstalling the dash, had to remove the dash for replay replacement everything work except the fuel gauge When the ignition on the gauge needle goes up to FUll then goes down to Low with a yellow fuel light blinking where should I check or am I missing any...

Hey, the front fog lights not working even after putting new relay and switch. My 105 doesn't come with a factory fog light relay I added one yesterday and a new switch but no luck, I checked the fuses, all good. No click sounds from the relay where should I start checking? Any grounds in the...

thanks for the response, i got na ew switch as well but no luck , could you tell me where is the ground wire the in bumper or anywhere else for the fog light thanks

did you get any solution? I put a new relay and no fog lights. somebody please help me with this thanks

My problem was different, the clutch pedal was not fully engaging