Jay Grimm

Great write up! Another valley plate fixed! Thank you!!

Thank you, I got this sorted out. I had the accelerator rod on backwards. It now has full movement and no binding. However the pump is still not moving. I am going to try and adjust the pump rod connectiong link again and see if I can get it...

Yeah, when I physically manipulate the pump, the truck starts up.

Thank you, I realized the accelerator rod was on 180 degrees backwards. 😒 I now have full motion in the pedal and the the throttle fully opens. However, it is still not actuating the pump arm. I made sure the stacking order is correct on the...

I would probably try to solve that issue first. The blades should fully open 90 degrees and be parallel with flow

Yes, it opens, but doesnt appear to be fully open.

Can someone help me figure out why my accelerator pump is not getting action? See post in build thread. https://forum.ih8mud.com/threads/1983-fj60-restore-build-elsie.837074/post-16434458

Thanks @bhsdriller , I got some washers, but I am still having issues. I have an Old Man Emu suspension lift, and 4" body spacers. I feel like when I push the accelerator down, there is not much movement and it is still not moving the pump arm to...

Perfect! Thank you!

Carburetor Help Needed! Another 3 years have passed since my last post. The truck has been sitting. I fixed the manifold leak, I hope, but haven't been able to start due to carburetor problems. Today, I see what the issue is. I cant find this...