Recent content by harrisonmonroe

Have taken apart, cleaned, and greased pretty much every connection under the truck I could find. Same issue. Although it drives fine and haven't had the limp issue since day 1. Lights are still flashing and the gear ones still dim. All grounds I have found I sanded and reattached.

Have taken apart, cleaned, and greased pretty much every connection under the truck I could find. Same issue. Although it drives fine and haven't had the limp issue since day 1. Lights are still flashing and the gear ones still dim. All grounds I have found I sanded and reattached.

Have taken apart, cleaned, and greased pretty much every connection under the truck I could find. Same issue. Although it drives fine and haven't had the limp issue since day 1. Lights are still flashing and the gear ones still dim. All grounds I have found I sanded and reattached.

Have taken apart, cleaned, and greased pretty much every connection under the truck I could find. Same issue. Although it drives fine and haven't had the limp issue since day 1. Lights are still flashing and the gear ones still dim.

Weird part is they aren't "on" per se. They just are dimly illuminated then they are on when that gear is selected. They are LED so definitely touchy with volt changes. That's how I suspect it is a connection/electrical.

it does. I've never noticed anything different but worth a check

‘94 … So I sandblasted and coated the frame and now I have a gremlin. Right after finishing I went to move it and power cuts off at 2000rpm. Idles fine. P D and 2 are dimly lit (they are led so sensitive) which makes me think electrical. Drove it and same thing. Cleaned transmission range...

I need a power lock assembly for a 94. driver front.

😳

Rusted lines replaced, compressor replaced, pressure tested, filled with new Freon. The cold air is intermittent. Seems like it works when it wants. Last time we repinned the wiring to ensure everything was tight. Even replaced the part of the harness that seems to connect to the oil pump...

You guys are going to scorch me so I'm prepared... I'm moving and found a mod kit I bought a few years ago and never installed. Problem is I cannot find the paperwork with it. Has a 2" pvc cap a few seals and some other stuff. What the hell is this!

I've searched. If I haven't searched adequately enough please don't respond. If you wish to be helpful it is MUCH appreciated, but I don't need to be told to use the search function because I have. Thanks. I'm looking for the internal brackets and glass for the side mirrors. I bought...

Ok folks. You're doing a swap and you're 100% staying with Toyota powerplant. Are you doing a 2UZ-FE or a 1HD-FT(or E)? Give me the pros and cons of all.

I’ve searched and searched. In stripping down all the old garbage from PO this is the last thing and I can’t figure it out. Important or part of PO add one? Runs down to front of engine. I’m thinking old fog lights?

Have some original parts I'm trying to part with. Pickup only (Indianapolis) and price is what you feel is fair. I know the pictures are a mess because I didn't feel like setting everything I have out. Things I know I have (all off a '94 except the cat heat shield and some rear flares)... Cat...