You haven't diverted the thread. Once I have found everything I am going to do a thread on the build with were I find the parts along with the install, fabrication work, the refabrication work from the screw ups that are bound to happen.
I did find out the suspension should be the first...
Of course for right now I have to keep this little 2F up and running till I have everything. That seems to be getting costly by itself. It started running horrible last night after I spent two weekends on it, got it running ok and now she wants more attention and my money spent on her.
Kind of...
I am on an extremely tight budget. My first reason is not the until cost but the cost and availability of parts later. The second reason is I use the truck as a daily driver. Third being I priced out all of the performance parts for the 2f and wold be close to 7 grand in just the engine, still...
It is a 55 ford fairlane with a 427 stroker pushing 680hp with out the 200 shot Nitrous.
The brake upgrade will be a little more than just slotted rotors. But taking it easy is the key when pulling any trailer no matter what you are pulling it with. My wife will be happy when I am not swiping...
I talked to TLC4X4 about the brakes since they build 60's on a regular basis with the 6.0. Was told upgrading the rear to disc is a waste of money. Which makes since as the front does 80% of the stopping. I am upgrading the front. The back brakes will be completely rebuilt when I rebuild the...
Familiarity & most gm vehicle's with the 6.0 have 4l65e unless it is a 2500 & larger. I will also be pulling a trailer occasionally. For me and my use of the truck, this made the most sense.
Okay so the easy part is done. After days of reading forums and searching the Internet along with Internet searches and talking to custom builders lime TLC4x4, I now have a game plan and the setup has been chosen.
Here is what the build goal is for the 60:
6.0 LS
4l65E 2 wheel drive...
The guy I got it from used a spray can to paint it tan. It was originally blue. The roof rack is one of the many items to be replaced.
What part of Houston you in klinetime574? I am down by Ellington.
BD turnkey is one of the better places to get a genIII engine, especially if you are not familiar with the LS engines and have not done many swaps before. The other good thing is if I remember correctly they run every single engine and send a universal swap kit with their engines. I have not...
First thanks for the info as it is greatly appreciated. After more research and being passed by grandpa in is electric chair, I have finally came up with a plan.
I am going to get the OME heavy duty 4" lift first and measure for clearances for the future engine swap. For the time being I am...
First thanks for the info as it is greatly appreciated. After more research and being passed by grandpa in is electric chair, I have finally came up with a plan.
I am going to get the OME heavy duty 4" lift first and measure for clearances for the future engine swap. For the time being I am...