Recent content by fj80toyman

Yes it is.

I know this is in good hands, excited to see where you take it! A little anxious til it actually arrives tbh...

Haha, c'mon out and drive it home!

Sadly, I need to sell this, it's going to need a lot of TLC, but it's a survivor, all stock except front seats and tires/wheels. Brand new zero-mile Falken Wildpeak AT3W's on ProComp black steel wheels. I have rebuilt the carb, new fuel pump and replaced all the worn out smog VSV's, and checked...

Having spent some considerable time documenting engine startability at cold temps in the -35C ~ -45C range around Timmins, gasoline freezing is not a problem. The problem is vaporization. Canadian winter spec gas is quite different than anything that the south 48 states can get, it has a much...

I would second all the good things that have been said about the rack and the builder, top notch for sure. I do have two comments, the first regarding the full-contact with the gutter. I typically park under a tree, and for about 6 months of the year, it drops different things on my roof. Not...

Now you need to update your Sig! Again.

If you do this, I would avoid using the adhesive side of the foam tape against the plastic tank of the radiator. It seems that for some reason, the adhesive has a bad effect on the plastic over time. I had a '94 where that had been done, the adhesive side of that "window foam" against the...

There doesn't seem to be any indication if these are for Left Hand drive or Right Hand drive, is that an issue with aftermarket headlights? Or do they make them universal which may not be DOT compliant? They show _J80_ but they don't specify L or R... Dan.

Seems the thread is a bit old, but I have been looking for one since my friend Tim put one on his 80. I'll contact you by PM if I can't find other info, but pricing, availability and options are my big questions. Dan.

Still for sale?

Have you checked the PCV line? I can't see that in the video, is that in good shape? Mine tee's off just above the valve and goes to the air cleaner (HIC Valve) and I found that one to be loose and causing one (of many) of my leaks. There are so many places this could be leaking, and spraying...

Not sure what measurement you're referring to, I sent you a PM. Dan.

@RAGINGMATT That looks like the one! Would you be willing to part with that ?... and for whuh? Here's the buggered one, to make sure, if you could measure it. I'd be uber grateful to get my hands on it! Dan.

Thanks for that, I don't really want the whole carb but I might have to go that route. This one is in OK shape now that I've gone through it. I know these little things are out there, I guess the right person has to see this and remember that they have one sitting around somewhere... Edit...