Recent content by Equinsu ocha

Sucks man but I’m glad you know what it is.

Ended up being a blown head gasket. Run a compression test.

Ended up getting the HuddExpo egr delete kit. Idle is the same. Hopefully the code stays away.

Vacuum hoses, vsv and vacuum modulator are new from last stint with this issue. VSV was the culprit then.

Appreciate the post. I searched my problem but found nothing specific to me.

So I have zero idle on cold start. I also have a P0401 egr code. I’m assuming that’s what’s causing my idle issue. It idles, slightly rough, when warmed up. Going through the EGR diagnostics in my FSM and I’ve followed the steps. When I connect my vacuum pump to the egr on the right side and...

I am also swapping the axles.

Donor rig is a 94, my rig is a 96.

My biggest questions is are where the harness runs on the diner rig, is it easy to get to, where is the module, stuff like that.

I’m getting both axles and everything else I need for $500. I’m getting it too cheap to do anything else.

Has anyone done a write up on here on swapping to locking diffs? Where to find harnesses and modules to remove from the diner rig? I’ve done a lot of searching and can’t find anything. Any help would be appreciated.

Thank y’all for all of this info. Will begin purchases soon.

Gotcha. I’ll start shopping for a resister now.

Rusty marlin, And this process will prevent a check engine light? I can pass inspection now with it on, but I’m an anal MFer.

Is there a solid write up for OBD2 EGR delete? All the threads I see have OBD1 and 2 all mixed together and it’s tough for my ADD ass to follow. Help please?