Recent content by diesekte

Hey y'all this is solved as of last night. My wiring harness had some tomfoolery going on that I discovered when I started picking it apart as I saw a few breaks in the alternator wire, both knock sensors etc. I took all the wiring apart and put it back together since I did the cable upgrade and...

Replaced starter - no change. Key on causes the starter gear to extend, which correctly meshes with flex plate. I hear a whirring but the starter doesn't really "kick". Battery is from 3/23 and variably 75-100% charged. Same exact issue with two different (1 brand new, one maybe 3-4 year old...

Edit- Pulled the starter and it does extend and spin when on the bench. Reinstalled and: I have one of those Teslong brand car colonoscopy deals. Stuck it up there and starter gear seems to be in good position fully retracted away from the flex plate. When key to ignition, the solenoid does...

I do get a click - one larger/louder click then two smaller. Can hear fuel pump running. Will try to jump starter later today. I thought the logic wire wasn't on very well so I removed it then clicked it back in and then I couldn't get it off last night lol. Strangely the black part it clicks...

Hello all- Yes I have searched and searched and searched. Can't find anything related to my specific situation. Pulled the motor for a rebuild and did a turbo kit at the same time. Also did the landtank alternator upgrade. Everything worked fine prior to pulling. I realized this is my fault...

Doing some thread necromancing here but going through the same thing. For intake cam - remove the bolt (not reverse threaded, its regular) in the end. The gears will come off. For the larger gear, remove the circlip above it then use a 3 jaw puller. Install - make sure the groove and the pin...

I'm stoked these are going out again. I got the emails in October and December but no love as of yet and have since moved.

Cool thanks for update

Any update on current status....group number, next expected shipment etc?