Recent content by DannyG

Following... :)

Following..

I'm thinking about getting a mid rise scissor lift for my home workshop. I have three vehicles, two fairly modern unibody types and my LX450. Will not have any issues lifting the two uni's, but have my reservations about lifting the LX. I plan to get the cross bars, which should help with the...

I've got a 97 LX I'm considering selling. I live in the Memphis TN area. Let me know if interested and I'll post more specifics. Funny, I purchased this in 2019 from a guy in Birmingham.

No. Only using the 6.5inch woofers in the front doors and some off brand 4inch coax speakers for the rear doors. I did build a box for an 8 inch Image Dynamics sub woofer for the passenger side rear wheel well space. Driving the woofer with a Skar Audio 350 watt amp mounted in the bottom of the...

I used the previous models of these speakers: Kicker KSS650. Originally ran them as coaxial, then switched them to separate components when I received my tweeter wings from Solve Function. Great sounding set of speakers. Running full active using a Kicker Key 200.4 amp. Here are a few pictures...

Not sure you have enough room behind the glove box for that amp. Better to measure twice and cut once. I did manage to mount a kicker key 200.4 amp behind my Alpine head unit, but that was a really tight complicated fit. It turned into a real nightmare every time I had to do some work in the...

A few more pictures..

Received and installed the handles this week. Man these are very nice! Here are a few pixs..

Sweet! Thank you!

Username: DannyG Logo Preference: LX450 Preferred Anodized Color: RAL1001 Beige Finish: Smooth Reasonable Price: $100 per grip Other Vehicles: none

Hi, just wondering which TCase this works with? Thanks, dg

Any issues with Airbag connection? Other wires?

I mounted the amp to the back of the head unit.. Was able to use existing brackets by bending as shown in picture. Very tight fit, a lot of trial and error with wire routing. Very happy with the results. However, this turned out to be a very custom fit with some limitations. For example, cannot...

This is how I wired up my DRLs... EDIT: Guess I could have added some comment to at least attempt to answer OP questions. I used the below diagram to setup my DRLs built into my Ironman bumper. I used two relays, one the ignition relay wired normally open, two the DRL relay wired normally...