Recent content by danielharro

Nice work, how hard is it to bleed the shocks after you install them? I was under my car yesterday and noticed my bushings were looking very sad...

I have been using Delo Synthetic 75W-90. It is 20% off and free shipping for a case of 12 so that brings the price down to $6.67 per quart almost half off anything else! https://buy.chevronlubricants.com/en/Product-Category/Gear-Oil/Delo-Syngear-XDM-SAE-75W-90/p/223030319

Any chance some of the plastic from the blow heater T got into your lines and clogged things up?

I guess that makes sense with the kit, didn't know if the kit came with grease or not. Thanks for the reply!

Did you have to add any more grease and if so what kind of grease did you add?

Thanks for sharing! I take it you removed the entire AHC system then? How does the new rid quality compare to the AHC?

well I re-wired the plug to the height accumulator and I am back in business, everything is back to normal! Nice easy fix! Thanks again for all the help!

Tonight I did some more digging and found a broken wire on the height control accumulator. My bet is this is causing my system to not function correctly. Hard to see in the photos, but the green wire at the connector is fully severed. I will hopefully fix this over the weekend and report back...

Ok, this morning I checked the connectors to the front L and R height sensors and they look good. I located the control valve assembly and that connector is also corrosion free and wires look good. I need to trace each wire and check for a damaged or broken wire as well. I also tired to use...

Ok Team- 2004 LX470 with 160k miles, and little less than 30K on last AHC fluid change. Currently the vehicle is in the N position maybe a bit higher and driving normally with no bounce ect. The "OFF" light is blinking and Techstream shoes C1736 and C1764. I tried clearing the codes without...

Driving in Low is no big deal at all. Any thoughts about just replacing the one airbag and saving some money until you are done with your trip?

What symptoms are you having with your AHC? I know our local toyota dealership pretty much sucks when it comes to anything other than an oil change... Stay away from them! I have tech stream if you want to trouble shoot issues. If you need to get your suspension fully replaced then Import...

Run away from that shop!

Any updates?

Here is what I posted a few years ago. Attached is also a photo of the wiring harness connection plug. If you note it has a arm that folds up and down on the connector itself so that it needs to be in the unlock position to fully unplug it. My arm must have unlocked the safely feature of that...