Recent content by CRobb

Appreciate it!

Need to repair my passenger side belt pretensioner. The caution in removal is making sure there’s no power while unplugging the pretensioner but after it’s removed are there any issues with reconnecting the battery and using the vehicle while shipping the belt off for repair?

Sleighing early Xmas deliveries.

This is what my squeak sounded like on the rear driver's side — ended up needing the rotor resurfaced and it took care of it.

The rotor ended up needing to be machined. There was a small amount of rust build-up in one area causing a slight amount of protrusion.

Heat & direct sun on the doors causes the actuators to mess up. Mine does the same and is a common issue. Do a search for door lock actuator and you'll find a bunch of info and how to replace them. Door Lock Actuator Replacement

I've been hearing a cyclical squeak for days and finally pinpointed it to the rear drivers side wheel / brakes. The squeak will increase in intensity when lightly applying the brakes and completely stop when applying more pressure on the brakes. I'm not very familiar with brake systems and was...

Do you think a 33.1" diameter with a 11.77" overall width on these 0 offset would cause issues? I'm running the Tough Dog 2" lift.

Thanks for the info. I've been looking at the MR 701s and trying to figure out which what tire to match up with it. Procomp's website has the tread width of your tires at 10.1" and the section width at 12.4". Did you have to make adjustments for any rubbing?

Which 305/65/17 tires are you running?

Not KO2s, but still rocking the whites.

Do you know the tire size specs on the 2” LC example you provided?