Recent content by caladin

Not at the ranch now I never saw fuel in the glass, but didnt' check after it ran dry We do have the OEM carb, but the float valve needle stuck in the open position and gas poured out of the charcoal cannister. Dads 89, and he doesn't trust that carb anymore, and had us(Bro #1) put a spare...

Didn't buy carb, brother 3 bought it for dad's ranch truck. Brother 1 installed it, but stopped because the electric pump we use to prime is bad. I replaced pump, added ign switched power to fuel cut off solinoid(that the bastard used black wire for) Soaked float in carb cleaner overnight...

Yup ran ign hot to that wire a heard the shut off solinoid click, gonna, have to pull the top and unstick the needle valve, no gas in the sight glass Whats the best way for cars only driven occasionally to keep the needles from sticking?

Brother installed new Chinese repro carb. I fixed fuel u Pump. Runs on starter fluid, but bowl sill looks dry, even with electric fuel pump on(we use to prime carb) Black wire with fuel cutoff solinoid, wrapped in white heat shield? male spade comes out of back of carb, what is it?

Thanks beno!

I think my power steering pump is leaking where the reservoir meets the pump. I suspect the o ring in this picture. Does anyone know where i can get the rebuild kit, or just that oring?

https://www.toyotapartsdeal.com/oem/toyota~pump~assy~vane~44320-60080.html

Here is what I used to fix mine, and will add next I had lots left over, but except for the sensor it's all cheap Heat shield SUPERFASTRACING 5 Feet Heat Sleeve Fiberglass Adjustable Heat Shield Sleeve Black 5FT X 6MM(1/4") for Car Wire Loom https://a.co/d/fjhf2mo Wire that can handle high...

Paid my mobile mechanic to do a rear brake job for me. He's usually very Dilligent. Part of getting it ready for regular driving. Now that I've been driving it more, when I slam on the brakes the rear passenger locks up way before the others... Honestly before I fell like I'm really braking...

Price to 78660

rear top corner of my drivers door has wind noise and i'd like to get rid of it. who makes the best Door weather stripping now that OEM is no longer available? Is it possible the door is just bent a little bit? the window misses the felt at the top, and I have to put a finger on it to close...

finish comparing my vac diagram to my vacc system, so I can find the one I messed up :D I'm checking the hoses one by one, and marking them on the diagram with a highlighter. I'm not really working very diligently at it to be honest. Procrastinating like mad.

Never heard anything, I guess re-upholster or sew your own seat-covers, luckily I have an industrial walking foot sewing machine. What I have not had is time and care points to do it.

Purely out of curiosity, what a decent condition no rust hj60 worth these days?

Both and link to BAT from FBM?