Recent content by Busted Crank

  1. Busted Crank

    Compound Turbos on a 2nd Edition B Engine

    He is trying to reduce the timing advance, to allow for safe boost
  2. Busted Crank

    Compound Turbos on a 2nd Edition B Engine

    My apologies, I didn’t realize the rotary pumps didn’t have that timer, as per Eurasia overland. I guess you will have to find out how to lock it out in the pump then
  3. Busted Crank

    Compound Turbos on a 2nd Edition B Engine

    Are you still going compound? Or just a single turbo now?
  4. Busted Crank

    Compound Turbos on a 2nd Edition B Engine

    so I pulled apart the spare automatic timer I have and looks like I’ve taken all the washers out of it for my Motor. however, the dimensions that they need to be are 14 mm OD 8 mm ID and then varying thicknesses as per the manual of 0.1 mm 0.2 mm and 0.5 mm Here’s some photos of just taking one...
  5. Busted Crank

    Compound Turbos on a 2nd Edition B Engine

    I had a look and can’t find part numbers for them, but I can have a look when I get home and see if I can get dimensions from the ones I have
  6. Busted Crank

    Turbo and gauge installation progress

    Next up would be add an intercooler if possible, and add a shim to the automatic timer
  7. Busted Crank

    Compound Turbos on a 2nd Edition B Engine

    I'm quite certain that the indirect injection non turbo engines run the most timing advance. Mechanical cummins engines run no advance mechanism. Have a look at this table, every degree of pump timing is two degree of crank rotation.
  8. Busted Crank

    Compound Turbos on a 2nd Edition B Engine

    On my 3b it only has the outer springs, no inner springs. so probably the equivalent of shimming the outer springs here
  9. Busted Crank

    Compound Turbos on a 2nd Edition B Engine

    Yep thats it, Its very sensitive, it was a fair bit of trial and error for me, you will get good at pulling the timing cover, i used a timing light after to get a ballpark of the changes but seat of the pants seemed to be best. the hx30 from a 4bt seems to be a good fit now, boost is very...
  10. Busted Crank

    Compound Turbos on a 2nd Edition B Engine

    with the timer on your bench, remove the circlip, and slightly twist while pulling the two halves apart, dodge the flying shrapnel, then pull apart the other two timers you have from the other broken engines, stack all the shims together and reverse installation. all jokes aside, it can be done...
  11. Busted Crank

    Compound Turbos on a 2nd Edition B Engine

    So im talking about the early 3B inline pump, looks similar to a p-pump 4bt. now picture someone fitted a timing advance like a distributor to the timing gear that drives the injection pump.
  12. Busted Crank

    Compound Turbos on a 2nd Edition B Engine

    Alright so heres the key to breaking 3b cranks, as I have done it twice now, once a tired motor, once a rebuilt motor. Both times, 14-18 psi of boost, intercooled, two different turbos Gt2560r, hx30. First had some timing added, second had timing retarded. So factory timing set at 11 degrees...
  13. Busted Crank

    3B starter 5.9L Cummins nosecone swap

    Well it’s 2019 so I figured I’d drag up this old thread, what I have found is you can use the starter from a 1994-2002 dodge ram 2500 or 3500 5.9 diesel, 12 volt. All you need to be able to salvage is your original aluminum housing. I was able to use the new motor, (drilled a new drain hole...
Back
Top Bottom