Recent content by Brian Delgado

Thanks for all the info. Very helpful

Thanks for the info. I did not have to remove any circlip. As soon as I removed the 2 bolts the motor came out. This could be the reason why there is no tilt on the new motor that is not working. The telescopic one I have and need to replace. Was just having a look at it and was wondering how...

Guys, Any of you replace the motors on the steering column. I’ve replace the bottom one and although working is not tilting. I’m putting it down to the telescopic motor which is quite stuck. I’ve tried to replace this but I’m struggling to see how it connects at the bottom of the steering and...

Thanks for the reply. Car previously had lpg tanks so there was no winch there. I would be thinking the ones that hold the winch to the cross member. Just ordered the new carrier but comes without bolts and was advised to contact Toyota for the bolts

Hi guys, Do you know what size bolts are needed to fit the under body spare wheel carrier?

Guys, I realize that this is an old post. The problem that I have is that the CDL switch does not engage the centre diff but the transfer case does. I’ve checked the switch and it’s fine. Could it be the relay?

I have a hazard switch to operate the CDL which is interchangeable with the actual hazard switch. When I swap them over the hazards still works so the CDL switch is fine. When I used to press the switch I could here the relay click but not anymore. However when using the transfer 4L it clicks...

Thanks Whitrzac that’s my next move. When you refer to the CDL module to you mean the relay?

An update. I had another blown fuse and the ABS light that was constant is now off and cruise control is working. CDL switch still does nothing ie does not engage CDL and does not switch off ABS

Thanks. I have swapped the switch over with the hazard switch and works just fine. I have just noticed last night that the cruise control and Air con are also not working. That seems to be the only other problems. Well the radio did blow out too but that has been removed

Hi guys I am aware that this has been tackled before but I am having a bit of a headache. I have a 1996 1FZ-FE. Recently my father put a new battery in reverse and it blew the fusible link. Since then the CDL switch will not engage on 4H and ABS light is constantly on. However if I put the...

Hi guys, I own an 80 series 4.5 petrol and I had an issue with a fuse melting in the fusebox when I connected a trailer. This was some time ago and everything has been fine. However my dad changed the battery on it the other day and there is no lights coming on the dash and keeps on blowing the...