Recent content by BIRDMAN84

  1. BIRDMAN84

    Keep or remove California SMOG components?

    After some thought I decided it was best for my situation to remove the smog pump and related components. 1) I am not required to pass any sort of emissions testing where I live, 2) I figure if I do not need the parts, it makes sense to remove them now and either save them for a possible...
  2. BIRDMAN84

    Keep or remove California SMOG components?

    I think I will just remove the belt for for. It seems like simple brass plugs would do the job if I do decide to remove the air rail.
  3. BIRDMAN84

    Keep or remove California SMOG components?

    Great, I was hoping this would be the case, but it seemed unlikely. So, if I understand correctly, the air pump is a separate, independent part of the emissions system and only connected to the rail? I may elect to remove and plug the air rail just to clean things up a bit.
  4. BIRDMAN84

    Keep or remove California SMOG components?

    Update: I have began to notice the smog pump making quite a bit of noise recently, both at idle with the hood open and also while driving under load. The sound is hard to describe, but sounds like a metallic sucking/knocking sound, and gets louder as the engine worms up. I am sure its coming...
  5. BIRDMAN84

    Keep or remove California SMOG components?

    Ok, if it is a Mark's/Downy header, I might be mistaking the gap in the area under the bolt as a crack, but its not. From google images of Mark's/Downy headers, it looks like thats how it bolts on next to the Cali manifold?
  6. BIRDMAN84

    Keep or remove California SMOG components?

    I don't have anything like that on the passenger side, but this is mounted on the driver side below the windshield wiper reservoir. Could it be it? Also has a blue wire not connected to anything.
  7. BIRDMAN84

    Keep or remove California SMOG components?

    Ok, so its not the stock dizzy? It does appear to be connected to the coil with +/- connection. Will removing the breaker plate require any adjustments to the timing? I don't think I am ready to tackle anything like that if I will need to reset the timing. It's running good so I don't want to...
  8. BIRDMAN84

    Keep or remove California SMOG components?

    Here are the best pics I could get:
  9. BIRDMAN84

    Keep or remove California SMOG components?

    I'm pretty sure is has points... may not be stock though. I'll take a picture tonight.
  10. BIRDMAN84

    Keep or remove California SMOG components?

    I will take a picture when I get home from work as I couldn't tell ya what the original looked like anyhow.
  11. BIRDMAN84

    Keep or remove California SMOG components?

    I really, really, really appreciate the help and advise. I just ordered the same repair manual. I'm definitely going to order that home brew smoker. I tried the carb cleaner trick but didn't turn up any leaks on the vacuum lines, but i'm sure there has to be one somewhere. I'll also order the...
  12. BIRDMAN84

    Keep or remove California SMOG components?

    UPDATE: I drove it to work today, and to the DMV to get every titled in my name and swung by the local Toyota dealership to pick up a new fuel filter... After running three tanks of premium 92 octane thru the carb, the stutter has all but disappeared! The PO mentioned he just ran regular in it...
  13. BIRDMAN84

    Keep or remove California SMOG components?

    I agree. I really just need to learn what everything does so I can fix things as the come up.
Back
Top Bottom