Recent content by bigjay850

Not in my case brand new switch does not work

Hi where is this module located any clue? Thanks.

Finally we got some high temps in NE area, so my AC did the flashing light on me yesterday. Which means non of the things that I have tried so fat worked for me. A mechanic asked me to pull in to his garage that this happens, but yesterday he could not look at it :-( So my next step would be to...

As I've mentioned in the above finds about the mirror - I WAS WRONG :-( Still do not know what is it. Next thing I am suspicious about the wires that I've unplugged from AHC computer when I did the AHC delete, in order to eliminate the flashing orange on the dash. There were 3 plugs, need to...

I think I've isolated the issue to the switch, after using test function in TechStream! You can press the switch's buttons UP/Down Left/Right in Driver or Passenger selected function and see the Voltage change and sure enough nothing happens in my case during UP/Down for Passenger mirror. Also...

06 LX470 Ok so I've dug out all kinds of threads about power mirror issues, but cannot see any real resolution for my case below. Any ideas help would be great, please. Problem: Passenger Side Mirror does not adjust Up or Down Left to Right motion works It does go down and then back up during...

Replaced with the updated part from Amazon $19. Will see if during summer it starts acting up.

Great thank you! Will replace and see if it solves the issue beacuse it happned again

Any luck getting it open? It would benice and helpful to all the community some info with pics. Thanks!

Ic. Thank you for the information. While reading the FSM I noticed that but was not sure hoping that japanese mfgs will not do those stupid things. Had 4 BMWs and as the models became more complicated i gave up on them. Stealers do not fix it properly and DIY become more complex - which is their...

Unfurtunately it happened 2 times again. But at this point it could because system was not charged 'properly' - vacumed then filled. I did not even use cauge that connects to high and low port. I am thinking maybe getting an a/c recharging/vacume system, inexpensive unit and do it. Problem is...

So far yes! It has been @4 days my kid drives it mainly and no issues. Will update in a week or so...

No. I did not. Figured its easier to change the part, because my LX did not have bad lines as far as I could trace and the relay that people refered to is part of whole electric box which would not go bad likely. Why? Do you think it is still a problem being masked by just changing the switch?

Wanted to update this issue, since it looks like the problem has been resolved. I have located the low/high preasure switch (see pic). It is behind bumper cover and radiator on the drivers side, threaded under the small magnified glass which is supposed to be used for testing AC charge level...

Thank you for your response, have you dealt with pressure switch? I assume it's on the compressor? Best J