Recent content by asrichardson

Thanks for your message - I just sold the last one for the 80s this past week. I am working on re-stocking - will update when I have an ETA.

If anyone still needs this (now) discontinued part, I am selling a reproduction on eBay - https://www.ebay.com/itm/267807529724?mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5337589904&customid=&toolid=10001&mkevt=1

Used OEM steering wheel pulled from a 2003–2007 Toyota Land Cruiser 100 Series. Tan/brown leather with integrated audio and cruise controls. Made in Japan. This is the tan interior color match that's hard to find in good condition — a direct plug-and-play upgrade or replacement if yours is worn...

Genuine Toyota OEM heater hose output T-pipe, part number 87248-60460. New, direct replacement — no drilling or modifications needed. Fits the LX450, LX470, and Sequoia. This is the plastic T-pipe that commonly cracks with age on these platforms, causing coolant loss. OEM is the right call here...

Factory-sealed, genuine Toyota OEM spark plug gasket/tube seal, part number 11193-70010. Made in Japan. Rubber, direct replacement — fits a wide range of Toyota and Lexus vehicles including 4Runner, Tacoma, Tundra, Land Cruiser, Sequoia, Highlander, Camry, RAV4, and many Lexus models. Compatible...

OEM Toyota trailer hitch tube plug/cover, part number PT228-35960-HP. Black, square, easy install — keeps your receiver clean and protected when not in towing. New, ships fast from Rocky Hill, CT. Bulk pricing available: 2 for $12.59 each, 3 for $11.89 each. Listed on eBay — buy it there for...

80 Series community — I sourced these specifically because of the demand I kept seeing here and on eBay. This is a reproduction fuel filler neck manufactured to OEM specifications for part number 77201-60331, covering the 1990–1998 80 Series (FJ80, FZJ80, HZJ80, HDJ80). No restrictor in the...

I own a Land Cruiser 100 and needed this fuel filler neck. Toyota discontinued 77201-60780 and finding a quality replacement was a dead end. So I tracked down a manufacturer who produces the part to OEM specs and imported it directly. These are high-quality reproductions spec'd to fit as a...

@Wags82 - if you are still looking for part 77201-60780, I was able to source it directly from a quality manufacturer, as I needed it myself. It is interchangeable with part 77201-60790. I have it listed on eBay, with more than 10 in stock...

No problem at all @whereditgo - thanks for all these photos, very helpful reference for examining my own fuel tank. What is the ODO mileage on your LX? (and what region has it mostly operated in?) My 03' LC is just around 98K, but was operated in SLC for most of its life with the previous...

You’re welcome! Glad you were able to secure them finally - they are in route!

Hi @GabDags - I have (3) sets listed on eBay

Thanks for this helpful post; I am first going to verify my tie rod measurements, however I’m leaning towards the solution of my splines being off by 10 degrees, as when I am driving, and the wheels are going straight ahead, and steering angle sensor reads 0 degrees from my OBD live feed, my...

Thanks for the update - so it was not the pipe at all? Do you have any photos of the seams you are referring to? Any particular corner or edge of the tank to look at? When you smoke tested again, could you see the smoke coming from the seams? (assuming you had less than half a tank filled)...

Thanks for the offer @hoser I will have to pass on the part for now, as I'm still not certain of what the difference is between the parts, so I don't want to risk making a bigger project, or find out the part is totally incompatible.