Interior trunk panel (threaded grommet)

[Poomunj]

I scoured partsouq trying to find this rubber grommet. Mine gave out while I took the interior panel out to re foam my sub.

Anyone with information on it would be aweosome!

 

[juicemode]

It’s a kit, PT347-60990-HK
Need one for each side.

 

[delz05]

Thank you for posting the part number!

 

[asrichardson]

It’s a kit, PT347-60990-HK
Need one for each side.

Where is the best place to order? Every place I have tried online (Toyota Parts Deal and Lexus Parts Now) cancel my order and say it’s not in stock. Any assistance is appreciated, thanks.

 

[delz05]

Ordered mine from a local dealer (Copeland Toyota)...

 

[Malleus]

Use real Toyota dealerships and you won't have that problem.

 

[asrichardson]

Ordered mine from a local dealer (Copeland Toyota)...

Thx

 

[asrichardson]

When did you last order from Copeland? I check their online DB and it said discontinued; these are all federated databases, so not sure it’s going to differ if I call one in Connecticut.

Did you make the order in person or online?

 

[delz05]

I just called... maybe this past July or August?

 

[asrichardson]

I just called... maybe this past July or August?

Thx. I will call them today

 

[terryscott621]

Thx. I will call them today

Please report back and let us know if you're able to order. I've also been looking for this part and have had multiple online orders cancelled from different dealerships saying that the part (PT347-60990-HK) was discontinued.

 

[dubdub20003]

I got them from partsouq not too long ago… however, if you have the plastic part unbroken, the pice on the back is just a rubber piece with an m4 or m5 nut inserted… so it bulges the rubber as you tighten.

Like these. https://www.amazon.com/dp/B096ZXFS3V?tag=ihco-20

 

[asrichardson]

Please report back and let us know if you're able to order. I've also been looking for this part and have had multiple online orders cancelled from different dealerships saying that the part (PT347-60990-HK) was discontinued.

Yes, I did call Copeland - they confirmed there were five present in the Baltimore warehouse, but they could not take order over the phone, so I went to my local dealer in Connecticut and was able to order (4) since they seem to break easily. Thanks again @delz05

 

[GabDags]

Reviving this by a chance that anyone has a couple left. called 4-5 dealers around, and none have it in stock, apparently sold out in the US. Anyone has any ideas where to source 2 pieces? " PT347-60990-HK "

 

[Dirt J]

If you need the hook/stud, I'd suggest looking at the parting out ads or eBay used. If you have the hook/stud, you can just use a generic rubber well nut, like suggest earlier.

 

[GabDags]

If you need the hook/stud, I'd suggest looking at the parting out ads or eBay used. If you have the hook/stud, you can just use a generic rubber well nut, like suggest earlier.

Actually dont have either. Was trying to find the hook and the stud. Panel is open in the back and would like it shut. I tried ebay with no luck for that part number. Will check parting ads

 

[dubdub20003]

Hey, I will expand my comment above… I think this is a big design flaw, and found a better solution. Install (or have someone install) a nut-sert in that place, which will permanently affix a threaded nut in that spot to mate with the plastic T. The rubber thing is just a bad design and never tightens down enough. A good car stereo place should be able to do it… maybe an off-road shop.

 

[Malleus]

There are several for sale on ebay; look for "1998-2002 Lexus LX470 Rear Cargo Net Hook Tie-Down Anchor OEM"

 

[asrichardson]

Reviving this by a chance that anyone has a couple left. called 4-5 dealers around, and none have it in stock, apparently sold out in the US. Anyone has any ideas where to source 2 pieces? " PT347-60990-HK "

Hi @GabDags - I have (3) sets listed on eBay

 

[GabDags]

Hi @GabDags - I have (3) sets listed on eBay

Thank you sir. Just grabbed it. Searched when I posted and found nothing. Perfect timing