Mustard has been parked since my last update for a shop project. I finally got that out of the way and she fired right up this morning. Love this truck.
FWIW, Holley has a lot of units on clearance sale. I dont know what that means... Perhaps they are no longer going to be doing the 2bbl units, or hopefully they are rolling the Sniper 2 mods to the rest of the line?
Currently looking at a Kia Soul or Toyota Corolla unit - heading to the pick a part place this Sunday to see what I can find. It seems from another site, both work in limp home mode, which is what we need when the ECU is not connected to the EPS...
I've dealt with a couple of rigs that were basically abandoned at my shop. It is not all that difficult in most places in a case like this.
Talk to your DMV. Local towing operations usually have a pretty complete understanding of how to get...
Thanks for the nice comments on the rack. I got it all together in time to make the trip to Moab. I drove it there and back without any issues. It will handle 80 on the Highway just fine although it sounds like I am driving through a...
For sure, you will need a speedy sleeve on that brake drum….
If you replace the TC extension housing, there are shims that set the preload on the TC output shaft bearing. You may need to add/subtract shims to compensate for differences in the...
You know Mike if you would stayed in Arizona your wouldn't need a pressure pot. Just about any sealed container painted black and set outside on asphalt would do the trick.
Maybe see if Georg @orangefj45 will take that one as is for a core against one of his dual seal units. Two birds one stone deal. Definitely sleeve it as well.
Many thanks to Living In The Past for the use of the loaner lens! Give it back to him with one of the first tries. I kept getting bubbles even when using a vacuum pot. To clarify the vacuum was to remove bubbles from the mix not the mold. I...