Has anyone done any of these?
replicated "Denso tags" for generators?
- Thread starter 67azcruizr
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
JohnnyC
Long ago TLCA# 2231
do you see it here:
http://www.fototime.com/ftweb/bin/ft.dll/pictures?userid={37A26E5E-9A56-40D1-B889-C9F1B8CBFD0C}&guid={BCF5559E-14F7-4CD5-9A0E-BDFDEC124825}&albumid={D9952CCC-E707-4792-9CFE-9B70E0951FFE}&st=he&sent=stored
AATLAS1X aka Shane I think was working on one? PM him
http://www.fototime.com/ftweb/bin/ft.dll/pictures?userid={37A26E5E-9A56-40D1-B889-C9F1B8CBFD0C}&guid={BCF5559E-14F7-4CD5-9A0E-BDFDEC124825}&albumid={D9952CCC-E707-4792-9CFE-9B70E0951FFE}&st=he&sent=stored
AATLAS1X aka Shane I think was working on one? PM him
- Thread starter
- #3
Living in the Past
SILVER Star
Don't think anything with a ten digit part number would be correct for a FJ25 or very early FJ40. I have a generator from a very early 1963 FJ40 with a 1962 production date and pretty sure the part number started with FJ40. The FJ25 generator tag probably started with FJ25. My parts book for the FJ25s is the 1963 version with the ten digits parts number not sure if it also had the old part numbers too. If not I think Jim still has a copy of his old parts book. I don't have time this weekend leaving town as soon as I get home from work but next week I can post a picture of what the early FJ40 generator tag looks like. None of my FJ25s had the stock generator when I bought them
- Thread starter
- #6
I would love to see that John
Living in the Past
SILVER Star
Shane the answer would be yes. Meaning both paper and plastic. In this case both foil and metal. The foil tags are not to good of shape but the metal one I have is pretty clean. I didn't think they was any interest in pictures so I never took any but I did check the tags out. I will take some pictures tonight and post.
Living in the Past
SILVER Star
Having a problem getting a good quality picture of the tags. Here the only one I could that was useable at all before the batteries in the camera died. I did notice that my FJ25 parts book showed the metal tags on the pictures of the engine. So I "guessing" the steel tags are older. I try again and post some better ones if I can get them.
Living in the Past
SILVER Star
So would that part number be "FA80 27000B" I doubt it has the new part number 27000-60060.
JohnnyC
Long ago TLCA# 2231
has anybody tried to hit up MOT with part #'rs ... i dont know about the ones that are fj40...but...many fa80's were produced...and they were the heavy haulers in Japan...they may have old stock?
Living in the Past
SILVER Star
I could try and get some good pictures of the foil tag if there is any interest. It a small rectangle not oval.
Sounds like a good idea John. At least once the pictures are done, they are ready for anyone to take up the challenge 
- Thread starter
- #17
I hit him up with the very early 40 generator part number, it was a no-go.
I do not have the FJ25 generator part number.
I was also wondering if the FQ15's had interchangeable generators/regulators? There has to be quite a few of those still around?
What about those FA turn signal assemblies too?
JohnnyC
Long ago TLCA# 2231
What about those FA turn signal assemblies too?
the duel sided tin cans ...ohhh yes...hit him up for those
They would be for a 1960's FA80 or even DA80
I would think there was some for the DA's and the FA's still around
Living in the Past
SILVER Star
"FA80 27000B" is the old part number in my FJ25 parts book and 27000-60060 is the new part number. This is the parts book from July 63. It has the old part numbers listed in the back of the book. Might also try the numbers Phil listed.
Mine is a sticker. I think it was off a 63.. I can't remember. Not a 25 though.
http://www.risingsun4x4club.org/uploads/wes/DSC_0926.JPG
I'll try and get a better pic tomorrow
http://www.risingsun4x4club.org/uploads/wes/DSC_0926.JPG
I'll try and get a better pic tomorrow
