MUCH cheaper OEM vacuum hose

[Landpimp]

I think I 1st saw this mentioned by Dan. But the OEM vac hose(3mm I think) is most often found in a 1 meter length(900mm) for about $10.

But if you order 90999-92003, you get 600mm for retail of $1.83!!!!! I got 6000mm for $14

John

 

[poseidon]

IS that a toyota part # or something?

E

 

[Landpimp]

yup.

IS that a toyota part # or something?

E

 

[CruisinGA]

seems like this should be in an FAQ or cruiser trivia section...

 

[PabloCruise]

How much do I need to re-do my '78 federal spec FJ40?

 

[Landpimp]

I have no clue. You migh thave some lines that need to use the longer 900mm hose.

another interesting fact. If you look up the part # for each hose, the last 2 digits of the part # is the length you need to cut the hose. so if the part # is XXXXX-XXX30, it would be a 30mm hose.

How much do I need to re-do my '78 federal spec FJ40?

 

[PabloCruise]

Thanks alot for this Pimp!

BTW, I could not find this post when I wanted to find it again - you may want to change the spelling in the title to "vacuum"...

 

[Landpimp]

yeah.....I cant spell

and done

John

Thanks alot for this Pimp!

BTW, I could not find this post when I wanted to find it again - you may want to change the spelling in the title to "vacuum"...

 

[nate]

So what is special about these lines that a standard vac line from the big rolls at Napa wouldn't work? Serious question, not trying to redicule you.

 

[CRZRJames]

Nate - There is nothing wrong with the Napa hose except that it's not Toyota. For the purist, everything should remain Toyota. Mr. Land Pimp is a purist's purist.

 

[Trevor]

Nate - There is nothing wrong with the Napa hose except that it's not Toyota. For the purist, everything should remain Toyota. Mr. Land Pimp is a purist's purist.

Actually there is a problem with the NAPA stuff - It's not metric and doesn't fit right.

 

[Landpimp]

exactly

Actually there is a problem with the NAPA stuff - It's not metric and doesn't fit right.

 

[beanz2]

Pimp,

What is the part number for the 6000mm roll please?

Dave

 

[Landpimp]

I ordered 10 bags of the 600mm to get 6000mm.

90999-92003, you get 600mm for retail of $1.83

as i mentioned, there are a few lines longer than 600mm I beleive, so you might need the $10 bags or splice

Pimp,

What is the part number for the 6000mm roll please?

Dave

 

[beanz2]

Thanks!

Dave

 

[Chef]

Pimp;
Great, now there's gonna be a run on vacuum hose

That's great info, thanks!

 

[Landpimp]

yeah Al( my parts guy) warned me about that(if I said something) thats why I ordered a bit extra

rather it go to Cruiserheads though

Pimp;
Great, now there's gonna be a run on vacuum hose

That's great info, thanks!

 

[PabloCruise]

Actually there is a problem with the NAPA stuff - It's not metric and doesn't fit right.

I am guessing this could be one reason my throttle position solenoid is not getting the vac it needs to pull off?

(grumbling as I pull off NAPA vac hose...)

 

[dd113]

Funny enough I just bought 32786 mm more or less, from CDan.

 

[Pluton]

Actually there is a problem with the NAPA stuff - It's not metric and doesn't fit right.

AND it cooks to brittleness in what...a few years, while the Toyota OEM hose lasts easily 10 or more years.