Thanks Murf
yep if anything else you can come out and hang with other Toyota owners. see wht they did you their rigs and then brag about what you did to yours.
Murf has my address and as i stated in the first box email me at FJ40_LANDCRUISER@COX.NET
Copper State you are welcomed to come out, we have wheeled with you guys in the past and we had a lot of fun.
Over the last 5 years we have had donations from our club members and have also sourced out parts for Land Cruisers. most are FJ40 but there are some 60 and 80 parts. some are brand new...
I have never had them check inside my rig, they usually look for the charcoal canister and move on, you can feed this to the canister if you have one, mine was toast and since I have a v8 deciced to bypass it all together. my rid of considered a play vehicle so I don't have to do emissions any...
home made gaz vapor seperator
here is a picture of my setup. I no longer get the pressure build up and since I routed the output into the breather I don't smell fuel as it gets sucked into the engine. it does however still smell when it sits in the garage and it is hot. so I crimp the hose so...
i built my own recovery tank out of 2 inch plastic pipe. the lines from my 28 gallon tank all to the bottom of my 5 inch long pipe with caps on both ends. the input is from the tank and the top is an output from the tube to the charcoal canister. I don't have a canister so I piped it into the...
Guys is you still need lug nuts our club the AZLCA can send you some.
We have a lot of spare brand new lug nuts we acquired by donations.
I need an email address from the person who would receive them and an address to ship to.
We will cover the shipping costs.
i added eric and Justin to the list of people going we now have 7 rigs going.
Desoto. Peck, & Swastika Mine trail Saturday Nov 02
Name Vehicle
1 Bob Pelatt FJ80
2 Marcel Clement FJ40
3 Eric Murphy FJ40/FJ80
4 Kevin Corns FJ40
5 Matt Leblanc FJ80
6 Justin Johnson FJ80
7 Jim...
hey if you guys are still missing parts emails me FJ40_landcruiser@cox.net (AZLCA) I have a large stock of gaskets and bearings and parts that may be useful to the project.
I got several club donations of parts and my garage is getting smaller.
email me if you need something and I may have it...
What do you need to complete this rig?
Email me at FJ40landcruiser@cox.net(the Arizona Land Cruiser Association) and I will try my best to get you what you need to finish this rig
Parts needed
I have a front piece of glass for the main part of the cluster and if you can not get your parts to work I have a complete cluster I may be able to get my hands on.