Hi all,I am assembling a gearbox and one of the bearings needed to be heated to get it on the bearing was accidently heated to 250 deg celcious instead of 250f.the bearing has a light brown color now I fitted the bearing but am now wondering if the bearing will fail.I have since read that 120deg...
hi, I have an aussie 1984 model .Does anyone know the difference between the dash pad part# the early one is 55404-90301 and the later one is 55401-90800 the later is no longer available is there any differences that would stop me using the early one
Hi,
Does anyone know of a solution that can be made up to soak parts in to remove enamal paint.the parts are quite intricate and if i could soak them in something (home brewed)for a week and then just hose of it would be a lot simpler .
Cheers Shamus
Try these blokes they are good to deal with used them before.They sell the longer (oversize) relief valve.It is just a longer valve so it slides on the unworn part of the valve bore and does not get stuck a cheap quick fix.do it before you blow your oil filter up!
TOYOTA LANDCRUISER 2H DIESEL...
I am also going to put 3.73 in my hj47 but i searched high and low including Qld Cruisers and found nothing second hand can get them new from Marks 4wd adaptors for about $550 I think.
Very nice indeed!that paint job looks perfect what paint system did you use?I am thinking of getting a shop to do the paint on my 47 now ,just starting to think the hassel with chem and close neigbours is not worth it.The price of good shop(which can be hard to find)scares me a bit ,did they...
Dam this I had just about convinced myself that I would send all my plating out to get done.The one thing that worried me about that was I would most likely loose parts in the process and all parts would have to be sent out at once to be cost effective and then I would have a big jigsaw puzzle...
Is your oil pressure high? 2h's with a few k's on them have a habit of the relief valve sticking causing high oil pressure and leaking oil around the fillter if its bad enough it blows the filter apart not nice.Just something worth looking at.
Cheers Shamus
Thanks for the replies,what I was thinking also.R2HKS If you are looking for one there is one here at http://cgi.ebay.com.au/Toyota-Landcruiser-5-Speed-Gearbox-Transfer-Case_W0QQitemZ140336390055QQcmdZViewItemQQptZLH_DefaultDomain_15?hash=item20acb35fa7&_trksid=p3286.c0.m14 Or just serch...
I can get hold of a 5 speed that was behind a 3b.I was wondering if it will bolt to a 2h or are there differances I am really only after the top shift plate as I already have a h55 and if the 3b 5 speed is differant is the shift plate compatable with all other h55's?
Cheers
I dont have the vehicle it is being wrecked and I was hoping to get the diff centers if they were 3.7's and put them in my hj47 to try and drop the revs a bit.I know some 60's came with 3.7 gears but am starting to think none in Aust After searching wreckers who say only 3 speeds came with...
I wonder how well it would go with something that has just under 100hp the 350 chev wouldn't have a problem anyone out there done this swap with a 2h or 2f?