York 2F bracket

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 22, 2003
Threads
67
Messages
2,059
Location
Oregon
From this thread- https://forum.ih8mud.com/showthread.php?t=121813

Here are pics of the york bracket on the '79 FJ40 (soon to be back in the Brimmer family). I will take more when I replace the pump- started spewing oil on the last run.

everything in line-
yorkbracket1.jpg

another-
yorkbracket2.jpg

best i could get of the entire bracket.. it is 1 piece that bolts to the head and the york and alt bolt to it
yorkbracket3.jpg

mounting bolts hiding down in there
yorkbracket4.jpg

alt tensioner bracket
yorkbracket5.jpg

another shows attachment to bracket
yorkbracket6.jpg

overall layout (believe it or not I've cleaned up the worse mess that was in there)
oba_2F_layout.jpg

manifold shot
oba_manifold.jpg

another, better angle
oba_manifold2.jpg
 
Doesn't appear to be much belt contact with the compressor pulley,:eek: Don't think that would maintain in a A/C application tho. Maybe pumping air has less of a load factor than A/C..:confused:
 
who made that bracket for the york? I want one in a bad way......
They are dealer install A/C mounting bracketry.....You want a right or left hand mount??? I'll have to check, but should have both...
 
That looks an aweful lot like the mount I have been running for a few years that cam from www.kccruisers.com...

It doesn't look much like the dealer install York brackets I have seen...

And yes that is enough belt contact to pump 160 psi on my setup...

Hey, CruisinGA! that link comes up as cumstoom cars biz , I don't see any 2F stuff there:confused:
 
As far as i can see thats henry.b´s fj40.

That bracket and the complete setup was made in 1997 by a cruiserhead from placerville, just ask henry.b. ;) Or send me a pm.
 
Good eye, Peter! I needed to take pics anyays because Henry is buying it back and I wanted to do this on my BJ42 buildup.

BTW, Henry has generally poor recollection for specifics like that or I would have asked.
 
Do you think you could get a close up of how the tensioner attaches to the york mount? Looks easy enough to fabricate. Thanks!
 
Do you think you could get a close up of how the tensioner attaches to the york mount? Looks easy enough to fabricate. Thanks!

Appears to be a stock alternator-tensioning bracket attached to the new mount by a bolt, similar to how it was attached on the original alternator-mounting bracket.




yorkbracket6.jpg
 
That bracket was manufactured by Mudrak and still is AFAIK. Cost around $175 back when I did my York conversion on my 2f. Go here and read my writeup I did many years ago. Well not a whole lot of years, maybe 5?
 
Second that Bill. Kelly O' Conner brought his 40 in a while back with the York mount on it; said he got it from Mudrak. I don't know if he 'invented' it, but I'm pretty sure he's offering them, and he's a good guy to work with.;)
 
Back
Top Bottom