Yet another lifted 80 thread:

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Its nice but have you repack those birf and the drive shaft look pretty dry to me.
Aku_01.webp
 
That was quick :cool:

Caster Correction... I guess it really comes down to a personal preference and whay you feel comfortable with. There are ALOT of folks out there running J's with no caster correction, even some running taller coils without caster correction. They seem to think it handles just fine... and some of these setups have been as such for several years at least. For example my little bro is running OME comp springs in the front, J's in the rear... and is too lazy to pull of his arms so we can press in his bushings (that have been in his back seat for over a year now)... He thinks it handles great, its his DD and he has done alot of wheeling in the past year too. I get in the thing and hate the way it handles, but then again both of my Cruisers have 5+ degrees of caster. Personal preference I guess... I can think of at least 5 guys running the exact same setup as Moody without caster correction ;)
 
I think it rides much better than stock. As Vitesse said, I came from owning a 62 to this 80, so I am certainly happy. As per pricing, I bought my kit from Kurt @ Cruiseroutfitters, as he is local, only 5 mins. from my work as I found out. I think the DL's and knuckles look dry because of the fine southern Utah dust that is all over them-I took it down to the San Rafel Swell a couple of weekends ago. It is, however, on the list to do this summer. As for the Caster Correction, I certainly feel the 'dartiness' others have referred to, so I will get those in before I have it aligned. That said, as it stands, I would drive it as is (once again coming from a lifted 62 with gears/locker/lift) and not know any different if noone told me so. Tires are Big-O XT, 285/75/16. I have been running a standard BFG AT on my last few trucks, so I wanted to try out something different. Speaking only on the first 2k, I am happy with their ride/noise/etc. I have yet to utilize them on anything offroad, so I will have to post up and report as I get some more miles and dirt time on them. Next up, Slee step sliders and an ARB bumper to round out the package! (I also need to get those running boards off of there)
 
Hey Moody,

Nice ride. Which type of shocks did you use up front N73 or N73L? I got the same lift (850J with N73L /863 with N74E) at home waiting to be installed. Have you installed the CC bushings yet?
 
I think it rides much better than stock. As Vitesse said, I came from owning a 62 to this 80, so I am certainly happy.

The guys who come from 60 series to 80's alway think a lifted 80 without castor correction handles great and 35's without regearing doesn't effect acceleration too much....I had a 60 for my daily driver for 8 years
 
Hey Moody,
I'd like to see a trail report sometime where you compare your pre-lift performance on a trail to your post-lift perfomance on the same trail. Any chances of that? You could claim the weekend on your taxes I'm sure, as it would directly benefit the Mud forum research and silver star subscriptions would increase. If you need justifications, I have a bucket load! Just ask!
 
Back
Top Bottom