which sliders to get?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 17, 2006
Threads
62
Messages
1,950
Location
Pacifica CA
The big three to choose from would be slee, hannah or metal tech.

All cost about the same.
Hannah is local to me and I can save on shipping but pay tax.

The metal tech sliders are the coolest looking but not quite sold on the actual functionality of the kickout. On my mini (light and locked) the kickout pushes the rear tire to the side of an obstacle, sometimes it just causes me to get hung up. I am not sure the kickout will function the same on a heavier/wider cruiser that is less prone to sliding around. The other factor is that a kickout sticks out the most right at the the part of the vehicle that needs the most clearance during a tight turn (comparing the track of the front and rear axle through the apex of a turn). More of a concern is the number of "ladder rungs" between the rail and the body, metal tech has less of them which i think was a contributing factor in creeper sleeper bending his.
That leaves me to choose between hannah or slee. Hannah is local and I have heard nothing bad about these sliders.
Any one out there have a better argument.
 
I think Creeper Sleeper bent his because he is crazy! If you have ever wheeled with him you would know what I mean. He would find a way to get body damage on a tank if he tried.

I would still get the MT because of the protection that they give. But I am a touch biased because I know those guys and because I have seem them in use.
 
The big three to choose from would be slee, hannah or metal tech.

All cost about the same.
Hannah is local to me and I can save on shipping but pay tax.

The metal tech sliders are the coolest looking but not quite sold on the actual functionality of the kickout. On my mini (light and locked) the kickout pushes the rear tire to the side of an obstacle, sometimes it just causes me to get hung up. I am not sure the kickout will function the same on a heavier/wider cruiser that is less prone to sliding around. The other factor is that a kickout sticks out the most right at the the part of the vehicle that needs the most clearance during a tight turn (comparing the track of the front and rear axle through the apex of a turn). More of a concern is the number of "ladder rungs" between the rail and the body, metal tech has less of them which i think was a contributing factor in creeper sleeper bending his.
That leaves me to choose between hannah or slee. Hannah is local and I have heard nothing bad about these sliders.
Any one out there have a better argument.


Search is your friend as is the FAQ section. It's got an entire thread on mods, including sliders.

Everything you will read says that all three make a very good product and they all support the sport and the board so you can't go wrong. From there, it's up to you. If Ken's local, it'll save some $$ on shipping.
 
The big three to choose from would be slee, hannah or metal tech.

All cost about the same.
Hannah is local to me and I can save on shipping but pay tax.

The metal tech sliders are the coolest looking but not quite sold on the actual functionality of the kickout. On my mini (light and locked) the kickout pushes the rear tire to the side of an obstacle, sometimes it just causes me to get hung up. I am not sure the kickout will function the same on a heavier/wider cruiser that is less prone to sliding around. The other factor is that a kickout sticks out the most right at the the part of the vehicle that needs the most clearance during a tight turn (comparing the track of the front and rear axle through the apex of a turn). More of a concern is the number of "ladder rungs" between the rail and the body, metal tech has less of them which i think was a contributing factor in creeper sleeper bending his.
That leaves me to choose between hannah or slee. Hannah is local and I have heard nothing bad about these sliders.
Any one out there have a better argument.


The kick out on the Metal Tech sliders do exactly like the ones on your mini truck did. I use them all the time. As for me bending mine, it was a one in a million thing that happened. I was flopped the truck at about 10 mph.. Hard enough to hit the kick out of the slider (not the main slider body) with the full weight of my truck. It did exactly what it was supposed to: bounce me back onto my tires... And I do mean "bounce"! There is another 10 people who will never ride with me off-road after that stunt. And to top it off, MetalTech removed my sliders, put new rub rails (kick-outs) on it and repowder coated them FOR FREE!!! That's a company that stands behind there product...

As for me, know that I probably wheel my truck harder than 99% of the people on this board. There is a reason I wheel Toyota... nothing else holds up!:cheers:
 
Check out SROR in search to see some of his work, I think they are really exceptional, custom ordered as well, talking with Jim about building a pair and he has been great
 
Another nod here for Solid Rock Off Road. Jim is great to work with and offers an exceptional product at a good price. It would be worth your time to talk to him about products and pricing.
 
I'd be looking at closer to you due to the shipping. Hanna and MT would be the closest. The cat guard the on the MT is very nice. Open, lets out heat, but protects the exhaust. As for the kickout, it is a lot more gradual than what I typically see on mini trucks. And you have to remember it is the rear quarter panels of the 80s that take the most abuse. So the kickouts help you get around banging up the rear quarter. I really thought the rails would hook on more things than they actually did in reality. They are angled up and out and I think this helps avoid getting caught on the supports. I can't recall an instance that I was ever hung on one. It may have happened, but it must have been minor because I don't have a vivid memory of it.
 
The second stage of the kick out is about 1.5” shift, that’s it. It’s not the big bulbous looking thing some people pass off as a kick out. Also since it fully ramped in the back it cannot hang you up if you back up. On that note we also ramp the entrance and exit on our main bodies, I don’t think the others do.

I would agree on the shipping thing, if Ken is near by that can save you the $140 it would cost for us to ship you a set. From what I have seen Ken and I have taken different approaches to the cat guard so I would look at those as the primary differences. For your reference ours is cut from a ½” thick solid plate and formed into the open shape it is in. This single piece represents almost 40% of the cost for these things.

Mark
 
Another vote for metaltech...the cat guard is important. Also, I like the kickout and it seems like the finish is nicer on their products than others....not that it stays on for too long, but it shows the effort that they put into their products.
 
Back
Top Bottom