Where's the bleedin horn

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 28, 2004
Threads
17
Messages
81
Just been checking everything out as I need to get a sask safety cert to use my BJ74 on the road, but the horn don't work. Anyone know where it's supposed to be ? Same thing goes for the fuse box, any ideas ?

Thanks


Mick

As you might have gathered I have not got a workshop manual yet.
 
Thanks usmcruiser

You were right about the fuse box, but I think my horn is still in Japan. There are a couple of wires where the horn should be but no horn.

Mick
 
Stone said:
The factory setup on my BJ74 are two small round horns side-by-side on the driver's side of the vehicle in front of the rad.


That's where the wires with nowhere to go to are. I guess the last owner must have fitted an aftermarket one and decided to keep it when he sold the vehicle. The stingy git took the winch off as well. Oh well at least I got it for a half decent price, you get what you pay for I guess.
 
I don't know much about BJ's....well, that's not entirely true. I have been on the receiving end a few times, but...Do the oilburners run an entirely 24volt system? Finding a horn might be a problem. Guess you could use a resistor? Or wire the horns in series? But if all you need is "a horn" to pass safety inspections, wire a 12v in and just honk it once for the inspection!
GL
Ed
 
Degnol said:
I don't know much about BJ's....well, that's not entirely true. I have been on the receiving end a few times, but...Do the oilburners run an entirely 24volt system? Finding a horn might be a problem. Guess you could use a resistor? Or wire the horns in series? But if all you need is "a horn" to pass safety inspections, wire a 12v in and just honk it once for the inspection!
GL
Ed

Not all BJ's are 24v. My BJ60 is 12v and there are others. The BJ42's were all 24v. Not sure on the HJ's. Varies with country of origin as well. If they are 24v go to a truck wrecker. No one will get in the way if you sound like a Peterbuilt!
 
I called the nearest truck wreckers this morning. They are sending me a horn today. I had a choice between 4' and 2' I went for the 2', I will probably mount it on the front bumper.


Mick
 
Mick said:
I called the nearest truck wreckers this morning. They are sending me a horn today. I had a choice between 4' and 2' I went for the 2', I will probably mount it on the front bumper.


Mick

2'? is that an air horn or an electric style air horn?
 
I ain't got a clue, but I expect it will get me heard.

A nice thing about driving a right hand drive over here is that you can beep your horn at the vehicle in front as much as you like and they think it's the passenger that's doing it.

Mick

Mick
 
Back
Top Bottom