When one door opens...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 21, 2017
Threads
2
Messages
52
Location
Austin, TX
I'm making some big changes to simplify the finances in my life, and as part of the changes, I have added a 1993 FZJ80 as my (mostly) daily driver.

She isn't perfect




But at least she seems to run fairly strong, with a little over 200k on the ticker.

the paint is tired



the interior equally so







but with the exception of the windshield it appears to have original glass!

The positives: clamshell is held together with a zip tie, at least a couple of the speakers work reasonably well (with the factory radio - though the CD player likes to spit CDs out), the AC is GREAT (and very necessary in Texas this time of year), three of the four windows roll down, the sunroof happily obliges to both the tilt and open/close commands, and all the functions (except sliding front-rear)of the power seats work, and my kids LOVE the way it looks and handles.

The negatives: well... I am trying to focus on the positives!

This weekend I'll be washing and cleaning and figuring out how to stabilize the paint (I am open to any suggestions). The rear DS door doesn't open from the outside, so I hope to fix that. The Rear passenger window currently doesn't work, so that is on the short list. I also want to check out the seats to see if I can get them moving forward and aft (I don't hear any motor noise when operating the switch, so I don't know if the gear is the only problem?). and Finally I plan to scope out the PHH and start working on the fluids.
 
Welcome to the forum! :flipoff2:

Your 93 is the same as a 94. Most everything there is interchangeable. 95+ have a few changes, OBD1 (93 and 94) to OBD2 (95+) and the dash. Doors and windows are the same.
EDIT: (I incorrectly stated brakes and axles were different, but they are the same)

You window problem is probably your master window switch. You can take it apart and clean it to try to make it better or you can purchase a replacement for about $45 from Switch Doctor.

The DS door not opening is the exterior door latch assembly. They are known to break. Find someone in the "Classifieds" section that is parting out a truck and get one that matches. You may even find one in the right color.

DO NOT, FOR ANY REASON, REMOVE THE SCREWS ON WIRING CONNECTOR ON THE BOX ON THE AIR INTAKE UNDER THE HOOD THAT IS NEXT TO THE AIR CLEANER. THIS IS THE VAF. IF YOU REMOVE THE SCREWS AND PULL ON IT, YOU WILL BREAK THE WIRES AND YOUR TRUCK WILL NOT RUN. THESE ARE NOT REPAIRABLE AND NO LONGER AVAILABLE.

Seats:
Remove one of the seats and see if the little white plug (about 3/8" in diameter) is still in the hole in the seat gears. You can do a search here for seats gears and get plenty of pictures. Sometimes if this plug has fallen out, the motor won't move or engage at all and may appear it is disconnected. The most common fix is to buy new seat gears from Gamviti. I found my plugs and screwed them back in, drilled a hole and installed a "locking screw", then sprayed white lithium grease on all of the actuator screws/rods. I also removed all the dog hair, dirt, and crud from the PO while I was under there. There are plenty of threads here on how to repair your seats.

Your truck is the first of the generation of head gasket worriers. It is worthwhile to track down any evidence that you HG HAS or HAS NOT been replaced.

How many miles are on your truck?

Make sure you ask everyone what oil you think you should be running, what is the largest size tire you can run on a stock truck, and what brand of tires are the BEST.

And BTW, WE NEED PICS. (Of truck and GF/WIFE/SO)
 
Last edited:
Welcome to the forum! :flipoff2:

How many miles are on your truck?

And BTW, WE NEED PICS. (Of truck and GF/WIFE/SO)

220k

I suspect you are right about the master window switch. I'll put that on the list - I thought that window was working when I picked up the truck.

I have scoped out the DS seat and at least one of the little white plugs is there - it is loose though. I have seen Gamviti's gears and plan to order them, I just hoped to confirm that I don't have to replace more than just those gears to get the seat sliding again.

Haha - I thought I fixed the photolinks, apparently I've been popular with Photobucket recently...

4TBzFV4.jpg


LFvNDwC.jpg


vykt4NU.jpg


2L0eat7.jpg


AzjT7AF.jpg


uqcW83D.jpg


RZZcPYd.jpg


e5HGTno.jpg


5JGX6MH.jpg


as far as tires and oil:

I generally try to use 2-stroke oil, I've heard it keeps all the engine surfaces clean AND adds horsepower (which I know these trucks lack), so I am planning to use that - the benefit is that I can steal some of it from my car when I need to use the weedwacker.

and tires - I am a big fan of smaller is better. I'll lose a little bit of top speed, but I should pick up some acceleration. SO I guess for me, the more germane question is how SMALL of a tire can I run stock, and what is your favorite brand/model with whitewalls?
 
You'll fit in just fine.........



Looks like the typical ragged out interior and paint due to heat and sunlight.

I do recommend getting rid of the taillight damage multipliers. They get in the way and get caught on things that cause more damage than they are worth.

Pic links work now!

Still no pics of the GF/Wife..........

Keep your wallet handy.
Good source for parts as well as vendors on this forum.
Toyota Parts | Toyota Online Parts | Genuine Toyota parts | Toyota Parts Online
 
Like BILT4ME said, just start a new topic thread asking what tires will fit on your new Cruiser...... these guys really like to help out, and I'm sure you'll get at least 2-3 responses. As far as the paint goes.... have you given Monstaliner a thought? Covers a lifetime of sins on the body! Good luck.... welcome to the addiction!
 
"and tires - I am a big fan of smaller is better. I'll lose a little bit of top speed, but I should pick up some acceleration. SO I guess for me, the more germane question is how SMALL of a tire can I run stock, and what is your favorite brand/model with whitewalls?"
I had the 265/75/16 variety at one point and they did well.
 
I do hope all the personal stuff is not a huge stress.

What part of Austin?

I am in Kyle (South of Austin), and can point you to a few resources. I just had a workup on mine from a buddy who is in a new garage. they are not specialists in LC but they do good work and are reasonable.

Look at cruiseryard.com , Jason is in Austin and is a good source of parts and knowledge.

I disagree on tires as I run 35's
 
Congrats, the best years are 93/94 ;)

Photobucket pics are not working

You have ABS? You can tel by looking at the rear axle to see if they're disc or drums. Disc =ABS
 
unfortunately, the personal stuff is a huge stress, and unlikely to be alleviated for another 12 years... but that is a story for another area, or another thread, or a one to be had over a beer.

It is an ABS truck, discs on all four corners.

I noticed another couple things today:
- the shifter gets 'jiggly' after hitting a pothole or going over bumps. likes to shift into 2nd gear.
- the PS mirror is a bit jiggly too
- top console compartment clip is broken (brittle plastic I'd guess)
- one of the vents in the center of the dash is broken on one side - it was wedged into the housing to keep from (you guessed it) jiggling.

I'm sure I will find more things after a little more time behind the wheel!
 
Last edited:
Gentile folk, the truck has a name, I dub thee JIGGLY
 
Don't know about the other stuff but the shifter is a fairly easy adjustment. Mine used to pop into neutral a lot, spent a few minutes under the truck adjusting the length of the shift linkage and problem went away.

For the paint you can go over the whole thing with a clay bar or rubbing compound and then put a good coat of wax on it. Won't make it look much better but should help it from getting worse.
If you want to clean it up probably a wet sand with a really fine grit paper and a new application of clear coat is the way to go.
 
Last edited:
Welcome! Congrats on owning an 80. The majority of people on here are helpful and cool. As with anything you have a few that are DBags, such is life.

Fortunately for you, you didn't get a maroon 80 (worst color). Unfortunately for you, you got a green 80 (second worst color, yes, I own a green 80 as well).

Monstaline that thing and forget it. Or rattle can paint that thing, like I did, and make it look "less sh!tty!"

Enjoy it! And good riddance to bad rubbish!
 
Fortunately for you, you didn't get a maroon 80 (worst color). Unfortunately for you, you got a green 80 (second worst color, yes, I own a green 80'as well.

Said from a prophet...150% accurate.....
 
Mine had jiggly vents so I removed the trim and put a 1/2 self tapper in the location of the vent's broken stud. it's held up really well, tight as factory since 12/'14
IMG_5014.webp
 
Last edited:
Welcome! Congrats on owning an 80. The majority of people on here are helpful and cool. As with anything you have a few that are DBags, such is life.

Fortunately for you, you didn't get a maroon 80 (worst color). Unfortunately for you, you got a green 80 (second worst color, yes, I own a green 80 as well).

Monstaline that thing and forget it. Or rattle can paint that thing, like I did, and make it look "less sh!tty!"

Enjoy it! And good riddance to bad rubbish!

I kinda like the 'patina' especially in green - I think it is one of the best colors for it!

I know I could buff it out and get the paint pretty shiny and then just wax every 2-3 months, but I am more inclined to cover it with some sort of synthetic or polymer sealant? I'm too old and busy to wax such a big tall car all the time!
 
I kinda like the 'patina' especially in green - I think it is one of the best colors for it!

I know I could buff it out and get the paint pretty shiny and then just wax every 2-3 months, but I am more inclined to cover it with some sort of synthetic or polymer sealant? I'm too old and busy to wax such a big tall car all the time!


Do Monstaliner white on the roof and down the pillars, then color of choice on the rest of it. It will help keep it cool in the summertime heat.

This holds up well, takes minimal prep time, and you can paint the whole truck yourself for $500. (I think based on what I read on here....)
 
I had to edit my earlier post. I misspoke that the 93-94 had semi float and drum brakes. I was mistaken. That is the 91-92.

See the changes in post # 2.

Thanks to @LandCruisinMy93 for pointing out the needed correction.

Use the following for cross-reference.

Slee - 80 Series Land Cruiser Newbie Guide
 
Back
Top Bottom