Wheelin62s HJ31 build (formerly known as project 6x6)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Any of these look like they might work if you put them on an angle.

9974FBEA-1FF8-4793-8B0D-6A013A36DD63.webp
4DC5C8DD-AECD-49DB-86BF-8561E595519D.webp
77F41C31-6647-4BE0-B474-6DD5DF5EFA63.webp
 
cruisermatt said:
I really don’t like that panhard mounted to those studs like that Eric, there’s going to be a lot of force going through there.
Click to expand...

X2. Putting the panhard behind the axle and mounting it lower on the housing (like an 80 rear) might give you more room.
 
GLTHFJ60 said:
X2. Putting the panhard behind the axle and mounting it lower on the housing (like an 80 rear) might give you more room.
Click to expand...

Unfortunately I cannot position the panhard bar behind the axle due to the air bags.
 
Back to the drawing board. x3 on figuering out something different for that panhard.
 
How big a camper are you gunna bolt to that thing?
 
Figured out the shock mounts. Clean, simple, and can use the same size shocks for both axles. Shocks in picture are some old ones I had for mock up.
IMG_7073.webp
 
This gonna be awesome!!!
 
Thank you for redoing that panhard mount :)
 
After a few rainy weekends and getting over the flue, everything is welded up, painted and back together. Next is airline and brake line routing, drive shaft shortening, electrical routing, exhaust, and bed modifications.
IMG_7330.webp

IMG_7332.webp
 
I definitely need to get myself some of those.
 
You must log in or register to reply here.

Share this page

Back
Top Bottom