Parting Out What's a '75 FJ40 FST complete bow and door set worth?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

turbodog56

turbodog56

SILVER Star
Joined
Aug 22, 2022
Threads
9
Messages
45
Location
Oklahoma City
Vehicle Model
  1. 40 Series
Location
Edmond, Oklahoma 73025 United States
Curious what these are worth? 1975 FST bows and doors. Also have the plexiglass for the doors. Thanks in advance for your guidance! Would also consider selling the complete roller. No motor or transmission. Everything is out of it except the axles. It's registered in Oklahoma.


75 fj40.webp


fj40 door 2.webp


fj40 door tops.webp


FJ40 door.webp
 
I have most everything. When I bought the truck, everything was already disassembled. I'll dig out some boxes shortly. I'll need to see what the additional weatherstripping looks like. Here are the gaskets for the plexiglass corners.

Corners.webp
 
Last edited:
turbodog56 said:
Curious what these are worth? 1975 FST bows and doors. Also have the plexiglass for the doors. Thanks in advance for your guidance! Would also consider selling the complete roller. No motor or transmission. Everything is out of it except the axles. It's registered in Oklahoma.


View attachment 4070990

View attachment 4070991

View attachment 4070992

View attachment 4070993
Click to expand...
You should post a lot more photos of the body of this truck. It looks like good patina preservation candidate as is, complete. Appears to be worth saving.
 
The tub will need quite a bit of work and the fenders were cut for fender flares. I was honestly planning to clean it all up and post in the spring, but got a wild hair today!
 
turbodog56 said:
I have most everything. When I bought the truck, everything was already disassembled. I'll dig out some boxes shortly. I'll need to see what the additional weatherstripping looks like. Here are the gaskets for the plexiglass corners.

View attachment 4071030
Click to expand...

The perimeter weatherstripping may still be a available aftermarket. Believe SOR. Someone made aftermarket windshield channel. The channel and handle for the sliding window not sure any source for those. If you have the window with bottom you have as complete I've seen in the last fifteen years.
 
Living in the Past said:
The perimeter weatherstripping may still be an available aftermarket. Believe SOR. Someone made aftermarket windshield channel. The channel and handle for the sliding window not sure any source for those. If you have the window with bottom you have as complete I've seen in the last fifteen years.
Click to expand...
It’s all there then. He’s are better pics of the window channel.
IMG_1246.webp
 
I’m sure it’s in a box. Thanks for the pic. I’ll look for the plexiglass bottom metal channels next.
 
Pictures of the rear sill? Compared to fixing a rear sill the cut fender wells is a small job.

I do agree with selling as a whole. Very few 75 FSTs around. Because US required three point seat belt starting 1/76 no FST were imported after 1975. If I wasn't too old with too many projects would definitely be interested. Already most everything needed to finish the project.
 
Living in the Past said:
Pictures of the rear sill? Compared to fixing a rear sill the cut fender wells is a small job.

I do agree with selling as a whole. Very few 75 FSTs around. Because US required three point seat belt starting 1/76 no FST were imported after 1975. If I wasn't too old with too many projects would definitely be interested. Already most everything needed to finish the project.
Click to expand...
All great points. Guess the pause button is needed right now.
 
You must log in or register to reply here.

Share this page

Back
Top Bottom