What will fit?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 19, 2007
Threads
19
Messages
161
Location
Seattle WA
My birfs are shot (clicking badly with the lovely build-up around the balls) and I'm sourcing some new ones. What years will work in my 1992 FJ 80? (non ABS). I've got a couple sources:

1) Fine spline birfs and inner axles removed from a 2/79 landcruiser FJ40. Same birfields as minitrucks and FJ60's $150

2) Birfields from a 85 FJ 60. $75

Any thoughts?

:confused:
 
Longfields should fit and they're cheaper than OEM. Lifetime warranty against breakage, too.
 
Call Cruiserdan and just get OEM 80 series birfs.


:crybaby:.... thats a mere $1000... I ended up doing this as there were no aftermarkets available at the time. I used 95 plus year model birfs, and just slipped the ABS rings off of them. They are stronger than the stock Birfs for the 91-92 model years.

If your thinking of puting lock-out hubs on the front eventually though, you'll need to stick with the stock type Birfs for the 91-92's.

You don't want Lonfield's if your rig is a daily driver, because they wear out quickly on the road(I talked to Bobby Longfield directly).

Slee has aftermarkets avail. as long as they aren't back ordered. Sometimes Slee has used Birfs, but then I would rather just know what I was getting and have brand new.
 
I have some sitting in my garage, but I think one of them is a clicker. I usually haul them around and sell em on the trail once an earlier model 80 breaks one :).

See you soon Alkaline! ;)
 
You don't want Lonfield's if your rig is a daily driver, because they wear out quickly on the road(I talked to Bobby Longfield directly).

Why would the lonfield's wear out faster as a d.d.? If they wear out faster, wouldn't that mean that they'd break easier too?
 
Thanks for the info on the other Birfs guys!

I've got a 'yota wrecker across the street from my work :D. I might wander over there and see what they've got for available birfs too.

Any way to physically check a Birf (to determine if it's good or not)once it's out of the truck?
 
Back
Top Bottom