What to do for Speakers

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 26, 2003
Threads
183
Messages
813
Location
Next to the Falls in OH
I have searched and have seen some pictures of what others have done for stereo speakers but am still looking for a clean location. I have the tuffy radio console for my 1980 FJ40 and am considering putting them in the doors, I will always have the hard doors
with a Factory Soft Top. My dislike of the in the door is your leg blocks the sound and the speakers will stick out a bit. I like the idea of Bose 161 in the back but I think it will look like a Teenage High School install and security issues come to mind. Anyone have any good secure ideas I know it is a 40 and sound quality will be less than great but I have gone years without sound? Also has anyone used the Tuffy Console and found a CD player that can operate at that angle.


Thanks
Nesta
 
You can use some U bolts and 6x9 boxes up on the roll bar.
 
My dad and I have installed 3.5" speakers to plates that bolt up to the A-pillar up under the dash. YOu can't even see them and they sound pretty good too. The hardest part was bolting the plates to the A-Pillar because the space is very tight. I could take pictures if you want, but it will be awhile because I am out of town this week.

Later

JT
 
high school install :flipoff2: this is my 82 fj40, tuffy console, Bose 151's mounted to rool bar.
24799346.jpg

24799422.jpg

24799325.jpg

24799412.jpg


front doors have 4" MB Quartz speakers(doors were already cut)

and don't do what the PO of my other 82 fj40 did, he put 6" speakers in the doors and they stock out so far they grate on your knee if your not carefull and make it a PITA to roll down the window.


in my 45 I have some cheap marine speakers up under the dash mounted to the firewall, sounds OK and can't see em, I leave the top and doors off all summer.
 
Deep South Cruisers said:
crap!

I can't resize the pic, let me get some software...


http://www.irfanview.com/

Although I have PhotoShop and several other graphics packages, Irfanview gets a workout on a regular basis for quick fixes. The thumbnail viewer and slide viewers are neat tools.

Slick, highly thought of and multi-faceted software. Although it's not billed as a do-it-all photo processing progam, it has many features the big-bucks software failed to add or deemed superfluous to their packages. It's a Swiss Army Knife for casual fiddling around with many graphic formats. Short learning curve....... just experiment with it a while.

john
 
thanks Sherwood, I use some crappy stuff that came with my scanner BUT I've learned how to use it and gets me by. I'll check it out!
 
P.O of my 40 put in 6 inch speakers in the dash, where your light switch and locking hub sticker is in that blue rig with the kid driving, and the equivelent space on the passenger side... works too well :)

glad i didn't have to cut the hole (had to trim the dash for my bro's head unit install... what a b!tch that steel is to cut). my 45 has speakers in the overhead console, also good if you move your sun visor (like attach to to the outside edge of the o/ head console.

rear speaker in the 45 is a 12 inch sub in a box between the frontmost rear seats, in the 40, i got an overhead console in the back with 6x9's (but 6x9's suck ass).
 
Tuffy also makes speaker boxes. They've got anti-theft type hardware and they hold any ol' 6x9 speaker. I bolted them to the top rear of the wheel wells in my 40.
I'm using the overhead console in the 40, but the floor mount center console tuffy in the 55,
Got a Pioneer DEH-P5500MP dash unit and 12 disc changer in it. Both work pretty flawlwessly at that angle.
 
TJDIV said:
SEARCH.



Cause I've seen those pics of Landpimps stereo enough to not even have to click the thread.

"oh, I bet there's green 40 pics in here.............................yep..............."..

Nice Set up John.


Haha. Beat me too it. I bet those pics are in here at least 4 times.
 
I wouldn't have posted cept he made the "high school" install comment :mad:
 
Search!!!

I have also seen those pix in the past and made reference to them in my first post. I was after anything new. The high school comment was not for Landpimp but some other photos I have seen with computer speakers on a roll bar with electrical tape and wires all over the place. You see my dog like wires and that method will not work for me. I know that stereo installs have been covered many times and people always say to cut or not to cut That is why I only asked for speaker ideas. Everyone loves to through out the "Search comment" but hey sometimes old topics need a fresh look.
NESTA
 
speaker location

I found some rigging clamps on ebay that fit the roll bar perfectly and have a stud that screw directly into the base of the bose 151's. The clamps are fully adustjable and make for and easy install. I replaced the existing handle type screw down with an allen head stainless bolt. At least the thief will need a allen head to get them off. And since they are up on the roll bar behind the front seats that are not in plain view and will rock your head off despite MT's on the highway.

Alf
 
alf said:
I found some rigging clamps on ebay that fit the roll bar perfectly and have a stud that screw directly into the base of the bose 151's. The clamps are fully adustjable and make for and easy install. I replaced the existing handle type screw down with an allen head stainless bolt. At least the thief will need a allen head to get them off. And since they are up on the roll bar behind the front seats that are not in plain view and will rock your head off despite MT's on the highway.

Alf


So when was the last time you got to get your head rocked off on the highway?
:flipoff2:
 
Back
Top Bottom