What plug goes here?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 15, 2010
Threads
159
Messages
3,717
Location
Middle Tennessee
anyone?
 

I am fighting to figure out why my firewall HCV cable is not moving. In doing so I removed the radio and saw/pondered the same thing. I did not disconnect it at any point and there is no mating type connector even near this one you show on my 93 FZJ80. Probably doesn't help you now but I do not think it connects to anything kinda like the CDL harness until you get the switch. HTH
 
Your good Eric. Mine had an unused socket at the same location. Th question was raised a couple weeks ago too so....
 
I am fighting to figure out why my firewall HCV cable is not moving. In doing so I removed the radio and saw/pondered the same thing. I did not disconnect it at any point and there is no mating type connector even near this one you show on my 93 FZJ80. Probably doesn't help you now but I do not think it connects to anything kinda like the CDL harness until you get the switch. HTH

Your good Eric. Mine had an unused socket at the same location. Th question was raised a couple weeks ago too so....

Cool. I haven't noticed anything not working since i put it all back together. Thank you for the reassurance though. Makes me feel a lot better about it!
 
I am finishing up my heater core replacement and while getting the dash put back together I noticed this plug doesn't have a connector anywhere near it. We're these used on the 93-94 or am I missing something?

It's right on top of the a/c box.

URL=http://s38.photobucket.com/user/unkle_elroy/media/E4141405-9AFC-43BA-A5EA-9780A1B01577_zpsy8loefaf.jpg.html][/URL]


if you look closely there aren't metal terminals in the sockets. There are quite a few of these plugs on a toyota.. just look in the underhood fuse block. All of the spots for relays or fuses that don't have any installed (from the factory anyway) won't have metal terminals.

Also, since it is physically located on a mounting block of some kind the chances are it is for an additional relay that isn't used on your chassis. Those 4-terminal connections with a keyed hump on one side are typical of toyota relays. The EFI relay would probably plug right in.. not that you'd have any reason to do so.
 
Back
Top Bottom