They are from Ellis Precision. The transmission shifter is for an automatic Tacoma (took this from my Taco when I sold it). The transfer case knob is one of their universal m12 knobs.
What Did You Do With Your 120 Today? (2 Viewers)
- Thread starter kbahus
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
They are from Ellis Precision. The transmission shifter is for an automatic Tacoma (took this from my Taco when I sold it). The transfer case knob is one of their universal m12 knobs.
Diff Kraken
SILVER Star
Here’s a similar posting to what I got for the fogs- I paid about $140+$20 shipping for each side and purchased from two different sellers in UAE. For the headlights on my truck now, they are from amazon and after 2 years they are getting some small cracks if you look really closely. I would like to snag some OEM sport headlights soon to replace.
For right side:
81211-60170 Toyota OEM Genuine LAMP UNIT, FOG LAMP, RH
For left side:
Part Number: 81221-60090
Description: LAMP UNIT, FOG LAMP, LH
Very sloppily trimmed the front bumper after I kept snagging it on stuff.
Then got her dirty.
Then got her dirty.
Refinished my old, oxidized headlight lenses and the fog light lenses. The fog lights always get overlooked. I did not take a before pic but we all know what they looked like.
I wet sanded 1200 then 3000 using a 2” pad with 1/4” shaft setup on my cordless drill. Cleaned up with rubbing alcohol and applied this stuff. $65 for 8oz and 4x applicator pads. Well worth it because I also did 2x sets of mk4 Jetta lenses as well as our old 2010 Yukon. The Merican plastic didn’t take the product well and developed surface cracks as it dried. I’ll need to redo them or replace them.
I wet sanded 1200 then 3000 using a 2” pad with 1/4” shaft setup on my cordless drill. Cleaned up with rubbing alcohol and applied this stuff. $65 for 8oz and 4x applicator pads. Well worth it because I also did 2x sets of mk4 Jetta lenses as well as our old 2010 Yukon. The Merican plastic didn’t take the product well and developed surface cracks as it dried. I’ll need to redo them or replace them.
Head unit progress... not the look I had envisioned, but not bad nonetheless
anything is better than all that faux wood... ugh.
Looks SOOOO much better than the chrome nastiness...
Awesome, thanks for the links + reply!
Installed the XenonDepot XTR HID kit with Phillips bulbs in my low beams. No before photos, but I think we all know how lacking the stock low beams are. Will get some shots of the light output tonight.
GF lives in rural GA, and we were having to drive with the high beams on at night. No need with the XD kit. Kit was a breeze to install. Most of the time was spent doing cable management because I hate visible wires.
10/10 on the purchase, and their customer support was awesome to boot.
picture from tonight
GF lives in rural GA, and we were having to drive with the high beams on at night. No need with the XD kit. Kit was a breeze to install. Most of the time was spent doing cable management because I hate visible wires.
10/10 on the purchase, and their customer support was awesome to boot.
picture from tonight
Last edited:
Holy! Can we see more pics? What size tire? Looks so good!
Replaced my cluster glass today, new glass from Lexus for $80cnd with shipping, and $60 to wrap it in Xpel Premium to keep this one scratch free. It looks and feels brand new inside. For a 10 minute fix, this was one of the best things I've done to the truck since I bought it.
let me preface this by saying it’s a test fit. That pic was on stock suspension. I’ve got an OME Medium Duty kit and Stage 2 Metaltech cool conversion awaiting install. Ordered Callahan 460 kit for the front, 470 kit for the rear, and Moog sway bar links today after getting in there and really assessing the situation.
1.25” Spidertrax spacers
1st Gen Tundra Wheels
255/75/17 Yokohama Geolandar G003
I'm really curious to see if the 255's look big enough from a distance. I really like the stock suspension adjustability but I hate how plain and tiny the tires look. Im 90% convinced of using the G003's as well it's such a great looking tire.
I'll post pictures once I've got the lift on. Hit a snag or two yesterday, and ended up ordering additional parts while I have it apart (460 brake kit, 470 rear brake kit, sway bar links). Rear conversion kit is "supposed" to arrive today, so I'm hoping I can get the rear put together today, and tackle the front end Christmas Day since I won't have my kids.
Did a good cleaning today, I think I got most of the cove/ Rausch Creek out of it.
NMBruce
SILVER Star
Looking good...
How do you like the KAON shelf? I’m thinking hard on that...I have their cargo cage, and it’s a nice piece.
What do you anticipate putting up there? Soft goods, etc?
I think I’ll also do a Victory 4x4 rear window “molle“ grate also...great place to hang a bag, first aid kit, etc.
Enjoy!
It's a very well built product. I don't plan on storing anything heavy up there. Right now I have a roll of shop towels, a spare rain jacket, windshield sun visor, and a set of reflectix panels I cut out for when I camp and sleep inside the GX. I'll probably store a sleeping bag up there as well and hang a fishing rod or two underneath it.
I chose the Kaon shelf because I didn't want something that reduces rear visibility so I decided against the window panels.
