Weird Sound from engine when starting cold

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 8, 2017
Threads
61
Messages
398
Location
Oneida, TN
Ever since the rebuild, I have been using synthetic oil and keeping up on everything. However the engine always makes this god awful sound when starting it cold.

I have a video here.

It is literally the first second after cranking. Sounds like marbles rattling around in there.

Any help is appreciated.

Scott
 
What oil filter are you running? It could be draining out when you shut off and needs to refill. Might be worth a look.
 
What oil filter are you running? It could be draining out when you shut off and needs to refill. Might be worth a look.

Its the factory OEM oil filter.
 
I have the same symptoms. Recent rebuild also.
There are a couple treads here on mud about the cold start “rattle” and some ppl solved the issue by using a Ford Racing 90deg oil filter adapter. It repositions the oil filter from the factory location to vertical so that it doesn’t drain when not running. I just ordered this thing, I’ll post here if it makes a difference. (Ford Racing part# M6880A50)
 
Changing to the small filter and stepping up oil viscosity to what the "for everyone but USA" chart calls for, has solved that problem.
 
Do you mean 20w-50?

That depends on the weather conditions where it's operated.

AU viscosity chart
1FZFE motor
20w50 oil- -7C deg to 38C plus ; 19F to 100F plus
15w40 oil -10C deg to 38C plus; 14F to 100F plus
10w30 oil -18C to 38C deg; 0F to 100F
5w30 oil -30C to 38C deg; -22F to 100F

Mine never sees 14F, but often is operated at 110F, so I run 15w50.
 
I have been using Mobil 1 synthetic 10w-30 since the rebuild (save for the break in oil).
 
I bought a ford 90° adabptor and ran it about 3k mi and it leaked the entire time...when I took it off I saw that the adapter side mating surface to the engine was conical. I was disappointed and didn’t re install. Wonder if a bushing could be made to handle that.
 
I bought a ford 90° adabptor and ran it about 3k mi and it leaked the entire time...when I took it off I saw that the adapter side mating surface to the engine was conical. I was disappointed and didn’t re install. Wonder if a bushing could be made to handle that.

Pinched O-ring maybe? I’ve installed one of those on a turbo S2000 and it never leaked.
 
The 90 degree Ford adapter fixed the same issue a few years back on my son's 94. Still quiet today.
 
Pinched O-ring maybe? I’ve installed one of those on a turbo S2000 and it never leaked.

Maybe so. I’d definitely love to have it work. I’ll give it another look this weekend.
 
It's the power steering vane pump "zipping" sound. Change your power steering fluid, that may help.
 
I do have a PS leak and my downward line is swollen crazy.
 
Back
Top Bottom