Warn 9.5xp Good For 80?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 22, 2007
Threads
19
Messages
202
Location
Where you live
I was just wondering what you guys think of using a warn 9.5xp on an 80. I know a lot of guys here like to go with the 1200 but would the 9.5xp also work? I recently got one and just wanted to make sure I went with one that can handle the weight of the 80. Thanks!
 
don't worry, you got a darn good winch for your 80...
 
x2 i think youll be fine....add a snatch block to the trail bag and your all good. Just make sure it will fit in whatever bumper you chose, or make your own around it.
 
I agreed on keeping a snatch block handy. Remember that 9500# is for the first line pull only. The longer the cable, the weaker the winch.
 
Thanks for the replies. I put it on my shortbus bumper a while back and this being my first winch I just wanted to make sure I didn't pick the wrong one to go with it. I have to take pictures and post them up soon because I have done a lot of work to my once stock 80.
 
If you search you will see that there are plenty of people that run a M8000. Sure, the M12000 is probably the best choice. If you aren't doing frequent hardcore stuff I wouldnn't worry about the 9.5
 
I like the 9.5XP a lot. Was gonna get that before I got the M12 on a fluke.
 
I agreed on keeping a snatch block handy. Remember that 9500# is for the first line pull only. The longer the cable, the weaker the winch.

Actually...its the other way around.

The highest rating will be on the layer nearest the drum, so the more cable payed out, the stronger the winch.

But, your point is a good one.
 
Actually...its the other way around.

The highest rating will be on the layer nearest the drum, so the more cable payed out, the stronger the winch.

But, your point is a good one.

I think he meant that with a longer cable there will be more layers on the winch resulting in less capability.

If you only had 50' line on a drum that holds 125', you could pull more weight with 25' of line paid out as compared to a winch with a full drum and the same amount of line out.

Clear as mud?
 
I think he meant that with a longer cable there will be more layers on the winch resulting in less capability.
If you only had 50' line on a drum that holds 125', you could pull more weight with 25' of line paid out as compared to a winch with a full drum and the same amount of line out.

If that is the case, then you did a much better job making the point than he did. ;)


I read it differently, but only responded because winching power and "layers" is an often misunderstood subject.

Thanks for the clarification.

Flint.
 
9.5 works great on my 97. 125' of Synthetic rope, snatch block, clevises and a couple of come-alongs to pull my friends away from trees, rocks and stuff.

You should be happy!:clap:
 
I think he clarified it much better. :)
 
Last edited:
the snatch block is key! please don't leave home with out one. i was stuck in axle deep mud (yes, we all hate it) and the m12 would not budge the truck. we snatched it up and it slowly puller her through, creating a small wall of front of mud in front of the axle.

snatch it up!
 
Had my very heavily laden hundy buried up to the frame rails in mud this past spring. My 9.5XP pulled it right out without issue (straight line pull). This is an underrated winch per a Warn rep I spoke to before I bought it. I have used it a number of times over the past couple years and it has proven to be a stout puller.
 
I have the 9.5xp on my ARB. I had to fab up some 1 inch spacers to get it to fit. It has not failed me yet!!



Tim
 
I needed to use the spacers from Slee for my 9.5xp.

I have the 9.5xp on my ARB. I had to fab up some 1 inch spacers to get it to fit. It has not failed me yet!!



Tim

My buddy and I tried to fit a Warn HS9500 into my ARB today but the winch body was too wide. Can you clarify about the spacers you use? I figured that I need some of those too.

EDIT: Nevermind. I just did the search!
 
Last edited:
You need a 15K winch and a really heavy clearance robbing ARB bumper to ensure you are never stuck.
 
Back
Top Bottom