Venting Axles and TC?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 22, 2003
Threads
284
Messages
8,118
Location
Kansastitty
Anyone see a problem with tee-ing all together and terminating under the hood with one of the Disributor breather vents? I don't want to vent it into the cab due to the smell of gear oil.

Thanks,

Ed
 
In a year's time, I can hear the awards announcer: "And the winner for the most lubricated distributor award goes to.............";p
 
65swb45 said:
In a year's time, I can hear the awards announcer: "And the winner for the most lubricated distributor award goes to.............";p


NAW, not the same one! The vent for the distributor will mount on the firewall and actually be inside the cab, the stinky one will mount high on the firewall, but in the engine bay.:cool:

Ed
 
After I saw this pic, I tied everything together and have it high in the engine compartment.
I used a Fram fuel filter, which is mounted off of the firewall bolts behind the heater blower/fan.
Not that I'm planning on taking my 40 for a swim :D
fjsub.webp
 
Wonder if he ever got out...
 
Kinda looks like the breather that was on the axle to begin with.
Thanks for the pic, though.

Ed
 
MrManny, how about the story that goes with the pic?
Kinda looks like a Baptism.
fjsub.webp
 
Sorry Ed,
That pic was my wallpaper for a while, I also wish I knew the outcome...anyone?
I could tell you the out come of this pic, I made it :D
River.webp
 
That was Gina during one of the Cruiser Treks in Alaska. She inadvertently went the wrong way and ended up a little deeper than expected. If I remeber right the worst casualty was a very nice camera. She was winched back out to shallower water then towed to a dry spot where after a bit of drying out and draining water out of her tank/carb etc. all was well. Very good advertisement for not going fuel injection. She has a website with many more pictures of her adventures. The guy in waders is Mark Whatley. I think Peter Straub is the one who winched her back, or it was a silver 70 series (I think)
 
Last edited:
Bret said:
That was Gina during one of the Cruiser Treks in Alaska. She inadvertently went the wrong way and ended up a little deeper than expected. If I remeber right the worst casualty was a very nice camera. She was winched back out to shallower water then towed to a dry spot where after a bit of drying out and draining water out of her tank/carb etc. all was well. Very good advertisement for not going fuel injection. She has a website with many more pictures of her adventures. The guy in waders is Mark Whatley


Thanks for the history! I thought Mark W was a skinny, wirey little guy. Shows what I know. He sure looks like he is holding court over the U-boat there.;)

Ed
 
Back
Top Bottom